10.14489/td.2016.03.pp.014-025

2016, 03 March

DOI: 10.14489/td.2016.03.pp.014-025

Fedorov A.A., Blesman A.I., Polonyankin D.A.
SPECTRAL METHOD OF CONTROL AFTER ULTRASONIC STRENGTHENING TREATMENT. PART 3
(pp. 14-25)

Abstract. It is considered the most complicated case of interference fringes occurrence on the parts subjected to ultrasonic impact peening (UIP). The interference pattern is caused by two simultaneously acting factors: regular microrelief and oxide films located on the surface. The spectral method of ultrasonic impact peening control is based on an interference pattern occurrence and caused by regular microrelief formation on the processed surface. The registration of oxide films on the samples with an oxide film and without it was conducted to determine the oxide films effect on the overall spectral pattern. The molybdenum coatings were formed on an oxide films surface by the magnetron sputtering. The coatings quality was investigated with the energy dispersive analysis by the line and the morphology of the regular microrelief by scanning electron and atomic force microscopy. It is shown that in developed spectral method of UIP control the spectral pattern occurred due to the dominant factor – regular microrelief formation on the parts surface during its ultrasonic peening. The results of investigation proved insignificance influence of the oxide films on the type and the nature of spectral pattern.

Keywords: ultrasonic impact peening, ultrasonic impact treatment, control, regular microrelief, regular submicrorelief, oxide films, magnetron sputtering, molybdenum.

+ - About the Authors Click to collapse

А. А. Fedorov, A. I. Blesman, D. A. Polonyankin
Omsk State Technical University, Omsk, Russia. E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Puryayev D. T. (1998). Interferometric method to measure and test the optical homogeneity of transparent materials. Optics & Laser technology, 30(3–4), pp. 235 – 238.
2. Rezchikov A. F., Ryabukho V. P. (2010). High-resolution interference methods of inspecting the surface and layered structure profile of precision engineering and instrument-making products. Journal of Machinery Manufacture and Reliability, 39(1), pp. 56-65. doi: 10.3103/S1052618810010097
3. Miroshnichenko I. P., Serkin A. G. (2011). On using optical interferential methods for measuring linear and angular displacements in diagnostics systems of technical state of materials and products. Kontrol'. Diagnostika, (7), pp. 46-50.
4. Xu Liu, Li Ma, Huan Ren et al. (2013). Multiple-surface interference fringes analysis basing on wavelength-modulated phase shifting interferometry. Optik, 124(21), pp. 4693-4696.
5. Gumennyi A. S., Dyrdin V. V., Ianina T. I., Mal'shin A. A. (2010). Scope of the interference testing method of the stress state of solids with elastic characteristics. Vestnik KuzGTU, (1), pp. 21-22.
6. Malov S. N. (2009). Interference inspection of geometrical parametres of reflecting objects. Izvestiia vysshikh uchebnykh zavedenii. Fizika, 52(12), pp. 187-190.
7. Lialikov A. M., Serenko M. Iu. (1999). Interference inspection of periodic objects in the realtime measurement with sensitivity adjustment. Zhurnal tekhnicheskoi fiziki, 69(10), pp. 126-130.
8. Iskhakova G. A., Gileta V. P. (1987). Formation of the surface layer parts with ultrasonic diamond burnishing. Sverkhtverdye materially, (5), pp. 53-58.
9. Iskhakova G. A., Gileta V. P. (1989). Structural and micro geometric state of the hardened layer after exposure to high-intensity ultrasound. Fizika i khimiia obrabotki materialov, (6), pp. 113-121.
10. Fedorov A. A., Petrochenko S. V. (2014). Spectral method of control after ultrasonic strengthening treatment. Part 1. Kontrol'. Diagnostika, (6), pp. 65-71. doi: 10.14489/td.2014.06.pp.065-071
11. Fedorov A. A., Petrochenko S. V. (2014). Spectral method of control after ultrasonic strengthening treatment. Part 2. Kontrol'. Diagnostika, (10), pp. 66-69. doi: 10.14489/td.2014.010.pp.066-069
12. Rozenfel'd I. L. (Ed.), Evans Iu. R. (1962). Corrosion and metal oxidation (theoretical basis and practical application). Moscow: Mashizdat.
13. Televnoi A. V. (2000). Increasing the resource and improving the machines of cryogenic equipment using technologies based on bulk microplasticity and static-hydrodynamic electrolysis. PhD thesis. City of Omsk.
14. Blesman A. I., Polonyankin D. A., Postnikov D. V. (2015). Research of the thermal-tension condition and the elemental composition gradient changes of binary systems produced by combined ion-plasma method. IOP Conference Series: Material Science and Engineering, Vol. 81, pp. 012031.
15. Guliaev A. P. (1986). Metal science: textbook for universities. 6th Ed. (revised and complimented). Moscow: Metallurgiia.
16. Gouldstein Dzh., Iakovitsa Kh. (Eds.). (1978). Practical raster electronic microscopy. Moscow: Mir

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

DOI: 10.14489/td.2016.03.pp.014-025

Copy the article DOI and follow the link https://id-spektr.ru/product/pokupka-elektronnoy-stati-iz-zhurnala-kontrol-diagnostika

Please specify the article DOI in the order comments.