Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная Archive
18 | 11 | 2024
2016, 04 April

DOI: 10.14489/td.2016.04.pp.047-050

 

Lapin V.V., Vinnik I.E., Miliachenko A.A., Borzikhin V.V., Fadin А.S.
THE THICKNESS MEASUREMENT OF THE PRODUCTS OF COMPLEX SHAPES AND WITH RESTRICTED ACCESS
(pp. 47-50)

Abstract. The article presents information on the problem of measuring with high precision the thickness of the products having a complicated configuration and large surface roughness in hard to reach areas with a greater radius curvature surface. The problem is solved by using the developed focusing damped immersion transducer with a focal spot diameter of about 0,5 mm by emitting the pulse frequency of 18 MHz. The thickness measurement of the test object by the transducer is conducted with the immersion method using a local immersion bath profiled under hard-to-reach location on the test object. The efficiency of the transducer with a local immersion bath was tested on samples with a thickness of 0,5 to 4,0 mm, pre-measured and certified in the prescribed manner. The Ultrasonic defectoscope USD-50 of domestic production with “thickness gauge” function was used for these purposes. It is visible the resolution of the transducer at the presented A-scan that allows to measure the thickness of 0,5 to 4,0 mm with a high accuracy.

Keywords: thickness control, ultrasonic testing, ultrasonic thickness measurement, focusing immersion transducer.

 

V. V. Lapin, I. E. Vinnik, A. A. Miliachenko, V. V. Borzikhin, A. S. Fadin (Federal State Unitary Enterprise “Scientific and Production Association “Tekhnomash”, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

 

 

1. Ermolov I. N. (Ed.). (1986). Ultrasonic transducers for non-destructive testing. Moscow: Mashinostroenie.
2. Aleshin N. P. (Ed.), Belyi V. E., Vopilkin A. Kh. et al. (1989). Methods for acoustic testing of metal. Moscow: Mashinostroenie.
3. Semerenko A. V. (2008). Echo method of ultrasonic thickness. V mire nerazrushaiushchego kontrolia, 40(2), pp. 6-10.

 

 

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article


Type the characters you see in the picture below



 

 

 
Search
Rambler's Top100 Яндекс цитирования