10.14489/td.2016.09.pp.028-038

2016, 09 September

DOI: 10.14489/td.2016.09.pp.028-038

Bobrov V. T., Prokhorovich V. E., Kinzhagulov I. Y., Bobrov S. V., Voronkova L. V., Tikhonov D. S.
INNOVATIVE METHODS AND TECHNOLOGIES OF NDT IN INDUSTRY. WCNDT 2016
(pp. 28-39)

Abstract. It is briefly reviewed the status of research in the Russian Federation of innovative methods and technologies of NDT in leading industries. It is shown that in space engineering the serious attention is paid to the quality of welded, brazed and detachable joints, requiring fundamentally new in the development of methods, technologies, solutions and tools of NDT, such as laser and ultrasonic inspection of solder joints and the diagnosis of residual stresses in special materials, method of acoustic strain measurement detachable joints. It is reported on the development and enactment of the State standard GOST R 52889–2007 “Non-Destructive Testing. The acoustic method of control efforts tightening threaded connections. General requirements”, regulating the application of the method of acoustic strain measurement detachable joints. The welds performed by resistance spot welding are widely used in the automotive, shipbuilding and electronics industries. The complex of non-destructive testing methods, especially the method of ultrasonic testing technology UAE, are used for its quality control. The studies of methods of ultrasonic testing of castings from nodular cast iron used for the manufacture of containers for storage of spent nuclear fuel, control of welded seams and metal nuclear power plants with the use of phased antenna arrays. The article summarizes the main results of the authors research papers presented on the 19th World Conference on Non-Destructive Testing in space engineering, nuclear power and other industries. It is shown that the studies conducted by Russian scientists and experts of non-destructive testing, the use of information technology in the processing of information and the development of controls meet modern requirements.

Keywords: innovative technology, ultrasonic inspection, phased antenna arrays, phased arrays, carbon fiber, spot welding, cast iron casting, texture.

+ - About the Authors Click to collapse

V. T. Bobrov (JSC NIIIN “MSIA” Spectrum”, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
V. E. Prokhorovich, I. Y. Kinzhagulov (Science Company EDC SEMS, St. Petersburg, Russia)
S. V. Bobrov (“SEC “Kachestvo” Ltd., Moscow, Russia)
L. V. Voronkova (SRC RF NPO TsNIITMASh, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
D. S. Tikhonov (“SPC ECHO +” Ltd., Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Klyuev V. V., Bobrov V. T. (2012). Innovation strategy development and methods of creating non-destructive testing and technical diagnostics. Kontrol'. Diagnostika, (2), pp. 12-20. [in Russian language]
2. Makarov Iu. N., Prokhorovich V. E., Ptushkin A. I. (Eds.), Lukhvich A. A., Shipsha V. G. et al. (2008). Actual problems of non-destructive quality testing of space technology: monograph. St. Petersburg: Al'teor. [in Russian language]
3. Prokhorovich V. E. (2013). Nondestructive testing of manufacturing quality. Problems of modern technologies development and application. V mire nerazrushaiushchego kontrolia, (2), pp. 42-43. [in Russian language]
4. Bychenok V. A., Kinzhagulov I. Iu. (2011). Laser ultrasonic testing of thin solder joints of liquid rocket engine chambers. Izvestiia vuzov. Priborostroenie, 54(7), pp. 50-54. [in Russian language]
5. Klyuev V. V., Bobrenko V. M., Bobrov V. T. (2015). Acoustic tensometry of detachable joints. State and prospects. Part 1. Problems of operation of the structures with plug joints. Kontrol'. Diagnostika, (12), pp. 60-68. doi: 10.14489/td.2015.12.pp.060-068 [in Russian language]
6. Klyuev V. V., Bobrenko V. M., Bobrov V. T. (2016). Acoustic tensometry of detachable joints. State and prospects. Part 2. Study results, development of equipment, methods development and application examples of acoustic tensometry. Kontrol'. Diagnostika, (2), pp. 14-26. doi: 10.14489/td.2016.02.pp.014-026 [in Russian language]
7. Bobrov S. V. (2012). Methods and technology of NDT of welds performed with contact welding method. MEGATEKh, (8), pp. 52-67. [in Russian language]
8. Bobrov V. T., Samokrutov A. A., Alekhin S. G., Bobrov S. V. (2014). Study of EMA technology of ultrasonic testing of contact spot welding in the automotive industry. Svarka i diagnostika, (4), pp. 55-59. [in Russian language]
9. Voronkova L. V. (2013). Cast as a modern construction material. The possibilities and the state of ultrasonic testing. Proceedings of the conferences «Week of metals in Moscow», 13 – 16 November 2012 – 2013, pp. 81-87. [in Russian language]
10. Bazulin E. G., Vopilkin A. Kh., Tikhonov D. S. (2015). Improving reliability of ultrasonic testing. Part 1. Determining the type of discontinuity during the ultrasonic testing using antenna arrays. Kontrol'. Diagnostika, (8), pp. 7-22. doi: 10.14489/td.2016.02.pp.014-026. [in Russian language]
11. Bobrov V. T., Bobrov S. V. (2016). Prospects of application of ultrasonic testing of texture anisotropy and formability of the rolled products in manufacturing conditions. Proceedings of the RAS session and business program of the forum «Terrotoria NDT», (pp. 88-100). Moscow: JSC NIIIN «MSIA» Spectrum». [in Russian language]
12. 19th WCNDT 2016. (2016). World Conference on Non-Destructive Testing. 13 – 17 June, 2016, Munich, Germany. DGZfP-Proceedings BB 158. Munich. ISBN 978-3-940283-78-8. Available at: www.wcndt2016.com

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below: