10.14489/td.2017.07.pp.056-058

2017, 07July

DOI: 10.14489/td.2017.07.pp.056-058

Maslov A. R., Neginskii E. A., Ott O. S.
MEASURING DEVICE FOR REMOTE DIAGNOSIS OF THE DRILLING PROCESS OF SOLID ROCKS WITH DIAMOND COATED CARBIDE PLATES
(pp. 56-58)

Abstract. A pilot drill bit for drilling hard granite-type rocks, the main elements of which are special cutting plates and measuring device for diagnosing major drilling parameters, ensuring the collection and transmission of measuring data via radio to the control system are developed. Measuring information about temperature in zone drilling from sensors embedded in the cutting plates, and of torque from resistorstrain sensors mounted on the casing of the drill, enters the electronic unit and digitally transferred from radio to radio, connected with a computer control system. Special software for automatic processing of measurement information provides remote configuration settings for digital converters, process management measurement, processing, analysis and storage of measurement data and perform a visual and graphical display of the results of the diagnosis.Developed device differs from similar designs that use contact slip rings. Laboratory tests have shown that the proposed solution improves reliability of measuring information transfer in conditions as close as possible to reality. Described device must ensure the collection and processing of measurement data on the characteristics of the processes of prospecting drilling of rocks for oil and natural gas rotary cutters with diamond-carbide plates, most close to reality.

Keywords: drilling, chisels, carbide diamond-plate, thermistor, resistive strain, transmission, radio channel.

+ - About the Authors Click to collapse

A. R. Maslov (Moscow State University of Technology “STANKIN”, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
E. A. Neginskii, O. S. Ott (JSC “VNIIINSTRUMENT, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Borovskii G. V., Kamenetskii L. I., Maslov A. R. et al. (2016). Strength characteristics of the process of high strength rock cutting using diamond tool. Vestnik mashinostroeniia. (9), pp 77-78. [in Russian language]
2. Maslov A. R. (2011). Diagnosis and monitoring of cutting process for screening as the quality of the machined surface. Kontrol'. Diagnostika, (9), pp. 49-51. [in Russian language]
3. Kozochkin M. P., Maslov A. R., Porvatov A. N. (2013). Innovative hardware and software system for the diagnosis of high-tech systems. Innovation, (10), pp. 128-131. [in Russian language]
4. Kozochkin M. P., Maslov A. R., Porvatov A. N. (2015). Information-measuring and controlling systems of power and acoustic parameters. Izmeritel'naia tekhnika, (8), pp. 5-9. [in Russian language]
5. Maslov A. R. (2012). Measurement of the roughness parameters of a treated surface in turning parts fabricated from heat resistant alloys. Izmeritel'naia tekhnika, 55(6), pp. 648-653. [in Russian language]
6. Maslov A. R., Lednev A. S., Sozykina A. I. (2012). Methods of creating innovative adaptive management telemetry systems. Vestnik of MSTU «Stankin», (4), pp. 62-63. [in Russian language]
7. Maslov A. R. (2015). Analysis of experimental data on microcutting forces software. STIN, (1), pp. 32-35. [in Russian language]
8. Kozochkin M. P., Sabirov F. S., Maslov A. R. et al. (2010). Vibroacoustic diagnosis of the tool in the process of cutting. Spravochnik. Inzhenernyi zhurnal, (2), pp. 44-47. [in Russian language].

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below: