10.14489/td.2019.05.pp.014-025

2019, 05 May

DOI: 10.14489/td.2019.05.pp.014-025

Danilov V. N.
THE INFLUENCE OF A CRITICAL ANGLE ON AN ORIENTATION OF RADIATION OF A SHEAR WAVE THE ANGLE BEAM PROBE
(pp. 14-25)

Abstract. In a far field it is received asymptotic expression of displacement of the shear waves transmitted in the elastic environment by the angle beam probe in view of features of radiation of such waves under a angle of probe, coming nearer to the third critical. At sufficient remoteness from a critical corner this expression passes in received earlier in geometroacustical approximation. The estimations carried out for steel have shown, that for converters with nominal angles of probe 37 – 40 influence of this critical angle causes increase of an angle of registration of a maximum of the signal, observed earlier experimentally. This feature is influenced as distance up to points of registration of a shear wave, and with working frequency of the angle beam probe and its size piezoplate (width of the directivity characteristic).

Keywords: angle beam probe, angle of probe, critical angle, shear wave, far field, directivity characteristic, transmission coefficient, displacement, radiation, phase function.

+ - About the Authors Click to collapse

V. N. Danilov (JSC RPA CNIITMASH, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Grebennik V. S., Tayts M. Z. (1981). Calculation of the prism finder pattern. Defektoskopiya, (1), pp. 87-101. [in Russian language]
2. Dianov D. B. (1965). Directional study of prismatic transducers. Defektoskopiya, (2), pp. 8-22. [in Russian language]
3. Kruglov B. A. (2002). Acoustic field of an oblique transducer in the far field. Voprosy materialovedeniya, (2), pp. 93-106. [in Russian language]
4. Felsen L., Markuvits N. (1978). Radiation and scattering of waves, Vol. 1. Moscow: Mir. [in Russian language]
5. Еrmolov I. N. (1992). Ultrasound control: quick handbook. Moscow: NPO TsNIITMASh. [in Russian language]
6. Еrmolov I. N., Vopilkin A. H., Badalyan V. G. (2000). Calculations in ultrasonic flaw detection: quick handbook. Moscow: NPTs NK «EKhO+». [in Russian language]
7. Еrmolov I. N., Lange Yu. V. (2006). Ultrasound control. Non-Destructive Testing: A Handbook: in 8 volumes. Vol. 3. 2nd ed. Moscow: Mashinostroenie. [in Russian language]
8. Danilov V. N. (2009). To the calculation of the acoustic field of an inclined transducer in the far zone. Defektoskopiya, (12), pp. 36-51. [in Russian language]
9. Еrmolov I. N., Razygraev N. P., Scherbinskiy V. G. (1978). The use of acoustic waves for ultrasonic testing. Defektoskopiya, (1), pp. 33- 40. [in Russian language]
10. Basatskaya L. V., Еrmolov I. N. (1978). Transducer field with tilt angles close to critical. Defektoskopiya, (4), pp. 3-11. [in Russian language]
11. Viktorov I. A. (1981). Sound surface waves in solids. Moscow: Nauka. [in Russian language]
12. Gurvich A. K., Еrmolov I. N. (1972). Ultrasonic inspection of welds. Kiev: Tekhnika. [in Russian language]
13. Danilov V. N. (2010). To the calculation of ARD diagrams of an inclined converter. Defektoskopiya, (5), pp. 45-65. [in Russian language]
14. Danilov V. N. (2015). Formulas of the acoustic path of the combined oblique transducer for the far zone. Kontrol'. Diagnostika, (2), pp. 43-50. [in Russian language] DOI: 10.14489/td.2015.02.pp.043-050
15. Danilov V. N., Samokrutov A. A. (2003). Consideration of the influence of the critical angle on the displacement parameters of transverse elastic waves excited by concentrated sources. Defektoskopiya, (10), pp. 45-54. [in Russian language]
16. Brekhovskih L. M., Godin O. A. (1989). Acoustics of layered media. Moscow: Nauka. [in Russian language]
17. Beytmen G., Erdeyi A. (1974). Higher transcendental functions, Vol. 2. Moscow: Nauka. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2019.05.pp.014-025

and fill out the form