10.14489/td.2019.12.pp.016-022

2019, 12 December

DOI: 10.14489/td.2019.12.pp.016-022

Murashov V. V., Yakovleva S. I.
RESEARCH AND IMPROVEMENT OF NONCONTACTING TECHNIQUE OF THE ULTRASONIC THROUGH TRANSMISSION METHOD OF NON-DESTRUCTIVE TESTING
(pp. 16-22)

Abstract. Operation capabilities of ultrasonic through transmission method of non-destructive testing of products from polymeric composite materials and multilayer glued structures are considered. It is shown that for detection of defects in products from easily damaged materials, from the hydroscopic materials which are not allowing wetting by liquids, in designs with rough surface, and also for detection of the under surface defects which are not revealed by contact methods, effective use of ultrasonic through transmission noncontacting method. The calculation procedure and designing of ultrasonic through transmission noncontacting probes on the frequency of 200 kHz, allowing to reveal defects in products from polymeric composite materials and in multilayer glued structures with higher sensitivity, than noncontact ultrasonic probes applied now on frequencies 20, 40 and 80 kHz is offered. The constructive scheme of the vibrator with two piezoelectric plates from ceramics TsTS-19, included inphase, with the metal lap playing role of wave guide, and matching layer from foam plastic is provided. It is specified that two piezoelectric plates works in “short circuit” mode therefore sound pressure piezoelectric plates increases by acoustic line twice, and oscillation strength four times.

Keywords: non-destructive testing, ultrasonic through transmission method, noncontacting technique, polymer composite materials (PCM), multilayer structures.

+ - About the Authors Click to collapse

V. V. Murashov, S. I. Yakovleva (FSUE “VIAM” SSC of the Russian Federation, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Kablov E. N. (2015). Innovative developments of FSUE “VIAM” SSC RF on the implementation of “Strategic directions for the development of materials and technologies for their processing for the period until 2030”. Aviatsionnye materialy i tekhnologii, (1), pp. 3 – 33. DOI: 10.18577/2071-9140-2015-0-1-3-33. [in Russian language]
2. Kablov E. N. (2001). Quality inspection of materials - guarantee of safe operation of aircraft technics. Aviatsionnye materialy i tekhnologii, (1), pp. 3 – 8. [in Russian language]
3. Kablov E. N. (2016). New generation of materials - the basis of innovation, technological leadership and national security of Russia. Intellekt i tekhnologii, 14(2), pp. 16 – 21. [in Russian language]
4. Kablov E. N. (2016). What to make the future out of? New generation of materials, technologies for their creation and processing - the basis of innovation. Kryl'ya Rodiny, (5), pp. 8 – 18. [in Russian language]
5. Murashov V. V. (2016). Testing and diagnostics of multilayer structures from polymer composite materials by acoustic methods. Moscow: Izdatel'skiy dom "Spektr". [in Russian language]
6. Klyuev V. V. (Ed.), Ermolov I. N., Lange Yu. V. (2006). Nondestructive testing: handbook in 8 volumes. Ultrasonic testing. 2nd Ed. (revised). (pp. 755-761). Moscow: Mashinostroenie. [in Russian language]
7. Murashov V. V., Yakovleva S. I. (2018). Non-destructive testing of aggregate and one-piece joints of propeller blade parts made of polymeric composite material. Trudy VIAM, (10). Available at: http://www.viam-works.ru/ru/articles?art_id=1323 (Accessed: 1.10.2019). DOI: 10.18577/2307-6046-2017-0-10-83-92. [in Russian language]
8. Murashov V. V. (2017). Application of acoustic impedance method variants for PCM parts and multilayer glued structures inspection. Aviatsionnye materialy i tekhnologii, (S), pp. 469 – 482. DOI: 10.18577/2071-9140-2017-S-469-482. [in Russian language]
9. Murashov V. V. (2009). Nondestructive Testing of Glued Joints. Polymer Science, Series D. Glues and Sealing Materials. 2(1), pp. 58 – 63. DOI: 10.1134/S1995421 209010122.
10. Murashov V. V. (2018). Research and improvement of acoustic low-frequency methods of testing of products from laminated plastics and multilayer glued structures. Aviatsionnye materialy i tekhnologii, (4), pp. 87 – 93. DOI: 10.18577/2071-9140-2018-0-4-87-93. [in Russian language]
11. Rose J. (2010). Achievements and prospects of development of the ultrasonic waveguide method of control. Materials Evaluation, 68(5), pp. 494 – 500.
12. Murashov V. V., Trifonova S. I. (2015). Testing of adhesive joints in PCM structures and products by ultrasonic shadow method. Klei. Germetiki. Tekhnologii, (5), pp. 15 – 23. [in Russian language]
13. Shrayber D. S. (Ed.), Mataushek I. (1962). Ultrasound technology. Moscow: Metallurgizdat. [in Russian language]
14. Zaklyukovskiy V. I., Kartsev G. T. (1978). Application of piezoelectric transducers for non-contact ultrasonic testing of products. Defektoskopiya, (3), pp. 28 – 34. [in Russian language]
15. Shkarlet Yu. M. (1974). Non-contact ultrasonic testing methods. Moscow: Mashinostroenie. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2019.12.pp.016-022

and fill out the form