10.14489/td.2020.08.pp.018-023

2020, 08 August

DOI: 10.14489/td.2020.08.pp.018-023

Osadchy N. V., Shepel V. T.
STATIC TESTS OF FULL-SIZE ACOUSTIC PANELS OF AIRCRAFT GAS-TURBINE ENGINES
(pp. 18-23)

Abstract. The article suggests the installation and methods of static tests for the limit working and fracture loads of acoustic panels of aircraft gas-turbine engines (GTE). It is not possible to perform the full scope of static tests on the engine as it is technically impossible to obtain the airflow pressures required by airworthiness standards. The required pressure in the proposed installation is created by the punch, which is the same shape as the panel to be tested. Flexible rubber sheets are used to equalize contact pressure on the panel surface. The similarity in the distribution of pressures on the surface of the acoustic panel created by the air flow as part of the GTE and the pressures created by the punch as part of the installation is confirmed by comparing the stresses and deformations obtained as a result of finite-element calculations. The article presents the results of certification static tests and flaw detection of a three-layer acoustic panel. Comparison of the results of finite-element calculations of stresses and displacements of the acoustic panel as a part of GTE and as a part of the installation has shown that in the latter case the estimations of static strength are conservative, which positively affects their safe operation.

Keywords: static strength, acoustic panel, gas-turbine engine (GTE), full-scale tests, airworthiness standards.

+ - About the Authors Click to collapse

N. V. Osadchy, V. T. Shepel (PJSC UEC-Saturn, Rybinsk, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Osadchiy N. V., Zubov S. S., Shepel' V. T. (2019). Control of vibration resistance of panels of sound-absorbing structures of an aircraft engine. Kontrol'. Diagnostika, (10), pp. 58 – 63. [in Russian language] DOI: 10.14489/td.2019.10.pp.058-063
2. Aviation Rules. Airworthiness standards for aircraft engines. Part 33. (2018). Moscow: Aviaizdat. [in Russian language]
3. Osadchiy N. V., Malyshev V. A., Shepel' V. T. (2017). A method for choosing the mesh density and the type of finite elements in the problems of static strength of multilayer structures. Deformatsiya i razrusheniya materialov, (1), pp. 10 – 17. [in Russian language]
4. Sirazhev S. B. (1985). Method for testing hollow largesized products for strength and tightness by internal overpressure. Authors certificate No. 1182326. USSR. [in Russian language]
5. Vorobey V. V., Prohorov G. N., Tatarnikov O. V., Tsarev V. M. (2006). А.с. СССР № 1840371, МПК G 01 N 3/10. Test method for open conical shells of composite materials by internal pressure, sample and device for its implementation. Authors certificate No. 1840371. USSR. [in Russian language]
6. Egorov G. A., Kobelev V. N. (1972). Installation for testing the mechanical strength of cylindrical shells loaded with external pressure. Authors certificate No. 324538. USSR. [in Russian language]
7. Bagdasar'yan A. A., Pilipenko P. B., Serzhenko P. P. (1986). Mechanical testing device. Authors certificate No. 1237945. USSR. [in Russian language]
8. Osadchiy N. V., Okrugin A. A., Shepel' V. T. (2016). Device for static testing of open shells for strength. Ru Patent No. 166440 U1. [in Russian language]
9. Osadchiy N. V., Shepel' V. T. (2018). Study of the transverse bending of a honeycomb three-layer panel with a circular axis. Problemy mashinostroeniya i nadezhnosti mashin, (1), pp. 86 – 93. [in Russian language]
10. Osadchiy N. V., Malyshev V. A., Shepel' V. T. (2017). Study of the transverse bending of a five-layer beam with a circular axis and ductile shear filler. Deformatsiya i razrushenie materialov, (11), pp. 16 – 22. [in Russian language]
11. Korneev S. V., Dolgih V. P. (2014). Mooney – Rivlin Model Coefficients in ANSYS Software Packages Obtained for Cover Rubber of Mine Conveyor Belts. Zbіrnik naukovih prats', 42(1), pp. 44 – 48. [in Russian language]
12. Peshkov S. V. (2009). Justification of the parameters of magnetic elements embedded in the conveyor belt. Kemerovo: KuzGTU. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2020.08.pp.018-023

and fill out the form