10.14489/td.2020.10.pp.056-063

2020, 10 October

DOI: 10.14489/td.2020.10.pp.056-063

Kozochkin M. P., Zhed O. V., Maung T. H.
THE STUDY OF THE RELATIONSHIP OF VIBRATION PARAMETERS ACCOMPANYING VARIOUS TECHNOLOGICAL PROCESSES WITH TEMPERATURE CHANGES
(pp. 56-63)

Abstract. Successful monitoring of technological processes using control of vibro-acoustic (VA) signals largely depends on the clarity of physical phenomena that determine the correlation between the functional parameters of the technological process and the diagnostic signs of vibration parameters. This article discusses such a relationship between vibration parameters and temperature in the core of technological processes. The experiments showed a stable pattern of changes in the parameters of VA signals with a change in the state of cutting tools in various technological processes associated with blade processing of workpieces. As such a parameter (Kf), the article considers the ratio of effective amplitudes in two frequency ranges: high-frequency and low-frequency. The most informative combination of frequency ranges is selected experimentally and depends on the dynamic characteristics of a particular elastic system. The paper gives examples of Kf changes for turning and grinding processes. To identify the nature of this phenomenon, experiments with the action of laser pulses on a steel plate with parallel recording of VA signals are considered. As a result, it is concluded that the Kf change is associated with a temperature increase in the frictional contact of the tool and the part when the cutting ability of the tool blade deteriorates. The work emphasizes that in the implementation of technological processes there are conditions that violate the described regularity. As such an example, the article shows an example of intense self-oscillations that changes the temperature regime in the contact zone. At the end of the work, it was shown that even during electric discharge machining, by changing the parameter Kf, it is possible to prevent short circuits and breaks in wire electrodes.

Keywords: control, diagnostics, decision making, vibroacoustic signal, cutting process, self-oscillations, temperature, signal spectrum, amplitude ratio.

+ - About the Authors Click to collapse

M. P. Kozochkin (Moscow State Technological University “Stankin” (MSTU “Stankin”), Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
O. V. Zhed (Peoples Friendship University of Russia (RUDN University), Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
T. H. Maung (Moscow State Technological University “Stankin” (MSTU “Stankin”), Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Kabaldin Yu. G., Laptev I. L., Shatagin D. A. et al. (2014). Intelligent systems for diagnostics of equipment condition and tool wear. Mashinostroenie: setevoy elektronniy nauchniy zhurnal, (2), pp. 47 – 50. [in Russian language]
2. Brzhozovskiy B. M., Hayrov D. A., Yankin I. N. (2012). Diagnostics of cutting materials based on the analysis of non-random components of the oscillatory process. Fundamental'nye i prikladnye problemy tekhniki i tekhnologii, 292(2-4), pp. 109 – 115. [in Russian language]
3. Laptev I. L., Shatagin D. A., Seriy S. V., Burdasov E. N. (2013). Fractal and wavelet analysis for diagnosing the dynamics of the cutting process and tool wear. Trudy NGTU im. R. E. Alekseeva, 98(1), pp. 94 – 103. [in Russian language]
4. Dobrovinskiy I. R., Medvedik Yu. T., Medvedik M. Yu. (2014). On the question of monitoring the condition of the cutting edge of the cutter by the vibroacoustic method. Izvestiya vysshih uchebnyh zavedeniy. Povolzhskiy region, 31(3), pp. 102 – 116. [in Russian language]
5. Belikov V. T., Ryvkin D. G. (2015). Using the results of observations of acoustic emission to study the structural characteristics of a solid. Akusticheskiy zhurnal, Vol. 61, (5), pp. 622 – 630. [in Russian language]
6. Chebotareva I. Ya., Volodin I. A., Dragin V. V. (2017). Acoustic effects during deformation of structurally inhomogeneous media. Akusticheskiy zhurnal, Vol. 63, (I), pp. 84 – 93. [in Russian language]
7. Zaytsev V. Yu., Nazarov V. E. (1999). On the linear frequency dependence of the absorption coefficient of elastic waves in micro-non-one-sided solids. Akusticheskiy zhurnal, Vol. 45, (5), pp. 622 – 627. [in Russian language]
8. Rudenko O. V. (1986). Interactions of intense noise waves. Uspekhi fizicheskih nauk, Vol. 149, (3), pp. 413 – 447. [in Russian language]
9. Kozochkin M. P., Volosova M. A., Allenov D. G. (2016). Effect of wear of tool cutting edge on detail surface layer deformation and parameters of vibro-acoustic signals. Materials Science Forum, Vol. 876, pp. 50 – 58.
10. Kozochkin M. P., Porvatov A. N., Grigor’ev S. N. (2017). Vibroacoustic monitoring of the major parametrs of electrical discharge machining. Measurement Techniques, Vol. 59, (11), pp. 1228 – 1233.
11. Kozochkin M. P. (2017). Study of Frictional Contact during Grinding and Development of Phenomenological Model. Journal of Friction and Wear, Vol. 38, (4), pp. 333 – 337.
12. Kozochkin M. P., Sabirov F. S. (2009). Attractors in Cutting and their Future use in Diagnostics. Measurement Techniques, Vol. 52, (2), pp. 166 – 171.
13. Kragel'skiy I. V., Dobychin M. N., Kombalov V. S. (1977). Fundamentals of Friction and Wear Calculations. Moscow: Mashinostroenie. [in Russian language]
14. Kuznetsov V. D. (1944). Solid state physics. Vol. 3. Tomsk: Krasnoe Znamya. [in Russian language]
15. Kozochkin M. P., Maslov A. R., Porvatov A. N. (2013). An innovative hardware and software complex for diagnosing hightech systems. Innovatsii, 180(10), pp. 128 – 131. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2020.10.pp.056-063

and fill out the form