10.14489/td.2023.07.pp.026-035

2023, 07 July

DOI: 10.14489/td.2023.07.pp.026-035

Vanyagin А. V., Gordeev B. A., Okhulkov S. N., Ermolaev A. I., Plekhov A. S.
ONE CASE OF VIBRATION DIAGNOSTICS OF RVM-45 VIBRATION MILLS AT A SINTEZ-PKZH LLC PLANT
(pp. 26-35)

Abstract. The article describes the course of vibration measurements at a particular metallurgical plant, one of the workshops of which is equipped with vibration mills, from the formulation of the problem to the analysis of the results. The problem lies in the low quality of the floor on which four RVM-45 vibratory mills of the RVM-45/131.01 design are located, causing periodic loads and vibrations. The paper presents the results of vibration tests obtained through measurements at various points in the room during the startup, operation and shutdown of mills. The studies were carried out using a measuring device “Vibran-2.1”. The reason for the occurrence of progressive vibration caused by the intearactive operation of vibration mills RVM-45 is revealed. Ways to reduce the overall level of vibration in the room with the simultaneous operation of all mechanisms are proposed.

Keywords: vibration mills, vibration diagnostics, synchronization, building destruction, spectral analysis, eccentricity.

+ - About the Authors Click to collapse

А. V. Vanyagin (Institute of Applied Physics of the Russian Academy of Sciences) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
B. A. Gordeev, S. N. Okhulkov, A. I. Ermolaev (Mechanical Engineering Research Institute of the Russian Academy of Sciences) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
A. S. Plekhov (Nizhny Novgorod State Technical University n. a. R. E. Alekseev) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Aksenov P. N. (1977). Equipment foundries: a textbook for engineering universities. 2nd ed. Moscow: Mashinostroenie. [in Russian language]
2. Shishkanov K. A., Dmitrak A. Yu. (2011). Analysis of structures and main characteristics of vibratory mills. Gorniy informatsionno-analiticheskiy byulleten', (4), pp. 324 – 328. [in Russian language]
3. Vibratory mill RVM-45/131.01 887-00.00.000 SB: Technical description and operating instructions 887-00.00.000 TO 2. (2002). Moscow: Opytniy zavod so spetsial'nym byuro. [in Russian language]
4. Chalomey V. N., Frolov K. V. (Eds.) Vibrations in technology: a handbook: in 6 volumes. Vol. 6. Protection against vibration and shock. Moscow: Mashinostroenie. [in Russian language]
5. Blekhman I. I. (1994). Vibrational mechanics. Moscow: Fizmatlit. [in Russian language]
6. Blekhman I. I. (2015). Synchronization in nature and technology. 2nd ed. Moscow: URSS. [in Russian language]
7. Verichev N. N., Verichev S. N., Gerasimov S. I., Erofeev V. I. (2016). Chaos, synchronization and structures in the dynamics of rotators. Sarov: RFYaTs-VNIIEF. [in Russian language]
8. Report No. 030-078-ЗС/20 on the inspection of the building structures of building 466 in the axes "5-10 / A-G", located on the territory of Sintez-PKZh LLC. (2020). Nizhniy Novgorod: Inzhenerniy konsaltingoviy tsentr «EKSPERTRISK». [in Russian language]
9. Gordeev B. A., Ohulkov S. N., Ermolaev A. I. et al. (2022). Vibration diagnostics of electromechanical complexes over 40 kw. Kontrol'. Diagnostika, Vol. 25 286(4), pp. 40 – 47. [in Russian language] DOI: 10.14489/td.2022.04.pp.040-047
10. Ohulkov S. N., Plekhov A. S., Titov D. Yu., Shevyrev Yu. V. (2016). Methods and devices for attenuating vibration of electromechanical complexes. Nizhniy Novgorod: NGTU im. R. E. Alekseeva. [in Russian language]
11. Novozhilov A. N., Isupova. N. A. (2011). Methods for diagnosing the eccentricity of the rotor of an induction motor by its electromechanical parameters. Vestnik PGU, (1), pp. 37 – 44. [in Russian language]
12. Gemke R. G. (1975). Malfunctions of electrical machines. Leningrad: Energiya. [in Russian language]
13. Kaminskiy S. G. (2004). Development of methods for vibration diagnostics and restoration of electric oilfield pumping units. Ufa: Izdatel'stvo UGNTU. [in Russian language]
14. Baykov A. I., Dar'enkov A. B., Titov D. Yu. et al. (2016). Vibration analysis of motors mounted on the same base. Proceedings of the IX international (XX All-Russian) conference on automated electric drive "Automated electric drive AEP-2016", pp. 8 – 12. Perm': Permskiy natsional'niy issledovatel'skiy politekhnicheskiy universitet. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2023.07.pp.026-035

and fill out the form