10.14489/td.2023.08.pp.004-016

2023, 08 August

DOI: 10.14489/td.2023.08.pp.004-016

Danilov V. N.
ON THE FEATURES OF THE CHARACTERISTICS OF THE SPECTRUM AND PULSE OF THE ECHO SIGNAL DURING ULTRASONIC CONTROL OF METAL THROUGH THE FUSED LAYER BY ANGLE BEAM LONGITUDINAL WAVE PROBES
(pp. 4-16)

Abstract. Based on computer simulation of an echo signal from a side drilled hole type reflector during ultrasonic control of the base metal by an angle beam longitudinal wave probe with nominal frequency of 1.8 MHz through transversal-isotropic elastic layer of constant thickness at different values of the anisotropy parameter, it is shown that with an increase in the anisotropy parameter there is a shift of the signal maximum in the direction of increasing the distance to the reflector, which is associated with an increase in the phase velocity of the quasi-longitudinal wave in the layer, and an increase in the maximum value due to a change in the double transformation coefficient when the longitudinal wave passes from the prism of the probe to the layer and back. For a probe with a frequency of 2.5 MHz, an increase in the anisotropy parameter leads to a decrease in the value of the echo maximum, since the increased increase in the attenuation of the quasi-longitudinal wave in the layer is not compensated by a change in the double transformation coefficient. For different nominal angles of probe (45…60°), a noticeable change in the shapes of frequency spectra and echo pulses at different values of the anisotropy parameter has not been established. The effect of increasing the distance from the control surface to the axis of the cylindrical hole at a constant layer thickness on the change of the amplitude of the echo signal in the calculated range of values of the anisotropy parameter is shown.

Keywords: angle beam probe, longitudinal wave, quasilongitudinal wave, angle of probe, fused layer, basic metal, side drilled hole, transversal-isotropic layer, ultrasonic control, echo signal, spectrum, pulse.

+ - About the Authors Click to collapse

V. N. Danilov (JSC «RPA «CNIITMASH», Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Danilov V. N., Kretov E. F., Razygraev N. P. et al. (2018). Research of the ultrasonic control of metal by the angle beam probe through the cladding fused layer. Kontrol'. Diagnostika, (7), pp. 4 – 18. [in Russian language] DOI: 10.14489/td.2018.07.pp.004-019
2. Danilov V. N., Razygraev N. P., Razygraev A. N., Tsukanov M. V. (2018). He ultrasonic control of metal through the cladding fused layer with use of the angle beam probe of longitudinal waves. Kontrol'. Diagnostika, (12), pp. 4 – 19. [in Russian language] DOI: 10.14489/td.2018.12.pp.004-019
3. Danilov V. N. (2017). Calculation model of displacement of quasishear waves radiated by the angle beam probe in the transversely isotropic material. Kontrol'. Diagnostika, (5), pp. 14 – 27. [in Russian language] DOI: 10.14489/td.2017.05.pp.014-027
4. Danilov V. N. (2018). About features of radiation and reception of a signal by the angle beam probe at the ultrasonic control of material through transversa isotropic elastic layer. Kontrol'. Diagnostika, (3), pp. 4 – 14. [in Russian language] DOI: 10.14489/td.2018.03.pp.004-014
5. Danilov V. N., Tsukanov M. V. (2018). Calculation model of an acoustic channel of the angle beam probe at a ultrasonic technique of material through is transversal-isotropic elastic layer for the reflectors such as a dihedron and a side of the cylindrical hole. Kontrol'. Diagnostika, (5), pp. 4 – 13. [in Russian language] DOI: 10.14489/td.2018.05.pp.004-013
6. Danilov V. N. (2021). Calculations of acoustic paths of inclined transducers in ultrasonic flaw detection. Moscow: Izdatel'skiy dom «Spektr». [in Russian language]
7. Klyuev V. V. (Ed.), Ermolov I. N., Lange Yu. V. (2006). Ultrasonic control. Non-destructive testing: handbook: in 8 volumes. Vol. 3. 2nd ed. Moscow: Mashinostroenie. [in Russian language]
8. Merkulov L. G., Merkulova V. M. (1976). Lectures on the theory of ultrasound. Taganrog: Taganrogskiy radiotekhnicheskiy institut. [in Russian language]
9. Danilov V. N. (2006). The program for computer simulation of the operation of electro-acoustic paths of flaw detectors "Impulse +". Defektoskopiya, (3), pp. 37 – 43. [in Russian language]
10. Danilov V. N. (1998). Calculation of the electroa-coustic path of a flaw detector with a combined inclined transducer. Defektoskopiya, (8), pp. 28 – 39. [in Russian language]
11. Danilov V. N., Voronkova L. V. (2020). Investigation of the possibilities of ultrasonic testing of cast iron with lamellar graphite using standard normal probe. Kontrol'. Diagnostika, (1), pp. 4 – 18. [in Russian language] DOI: 10.14489/td.2020.01.pp.004-018
12. Danilov V. N., Razygraev A. N., Tsukanov M. V. (2016). About the radiation pattern of combined oblique transducer in the ultrasonic testing of metal through a cladding layer. Kontrol'. Diagnostika, (1), pp. 12 – 19. [in Russian language] DOI: 10.14489/td.2016.01.pp.012-019

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2023.08.pp.004-016

and fill out the form