10.14489/td.2015.08.pp.058-065

2015, 08 August

DOI: 10.14489/td.2015.08.pp.058-065

Bezborodov Yu.N., Kozlov K.E., Egorov A.V.
DYNAMIC METHOD AND DEVICE FOR CONTROL OF THE MECHANICAL EFFICIENCY OF CHAIN TRANSMISSIONS
(pp. 58-65)

Abstract. In this paper, it is propose the inertial method for control of the mechanical efficiency of chain transmission, and impact of its parameters on the mechanical losses in the chain mesh is found as well. The moment of inertia of the rotating masses serves as an optimization criterion. A methodology for determining the moment of inertia of the losses and efficiency of the chain transmission is suggested. Based on the developed methodology, equipping an electric chain drive with a hardware and software system allows to measure the moment of inertia of losses in chain transmissions and impact of parameters on the change of its value in a wide range of speed and load operation modes of the electric drive.

Keywords: inertia, inertial diagnostics, mechanical losses, chain transmission, mechanical efficiency.

+ - About the Authors Click to collapse

Yu. N. Bezborodov
Siberian Federal University, Krasnoyarsk, Russia.

K. E. Kozlov, A. V. Egorov
Volga State University of Technology, Yoshkar-Ola, Russia. E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Conwell J. C., Johnson G. E. (1996). Experimental investigation of link tension and roller sprocket impact forces in roller chain drives. Mechanism and Machine Theo-ry, 31(4), pp. 533-544.
2. Huo J., Yu S., Yang J., Li T. (2013). Static and dynamic characteristics of the chain drive system of a heavy duty apron feeder. The Open Mech. Eng. J., (7), pp. 121-128. doi: 10.2174/1874155X01307010121
3. Troedsson I., Vedmar L. (1999). A method to de-termine the static load distribution in a chain drive. ASME J. Mech. Design, 121(3), pp. 402-408.
4. Zhang L., Zhang C., Horng J.-H., Chen Z. (2012). Study on simulation of the chain transmission mecha-nism. Advanced Materials Research, 593(6), pp. 797-800. doi: 10.4028/www.scientific.net/AMR.446-449.797
5. Liu S.‐P., Wang K. W., Hayek S. I. (1990). Modeling and analysis of chain drive systems. J. Acoust. Soc. Am., 87(S1), pp. S136 – S136.
6. Mevsha N. V. (2005). Methods of research and evaluation of the technical condition of chain drives. PhD thesis. Krasnodar.
7. Spicer J. B., Richardson C. J. K., Ehrlich M. J. et al. (1999). Effects of frictional loss on bicycle chain drive efficiency. J. Mech. Design, 123(4), pp. 598-605.
8. Spicer J. B., Richardson C. J. K., Ehrlich M. J. et al. (2000). On the efficiency of bicycle chain drives. Tech. J. of the IHPVA, 50(2000), pp. 3-9.
9. Spicer J. B. (2013). Effects of the nonlinear elastic behavior of bicycle chain on transmission efficiency. J. Appl. Mech., 80(2). doi: 10.1115/1.4007431
10. Doppelbauer M. (2011). Accuracy of the determi-nation of losses and energy efficiency of induction motors by the indirect test procedure. EEMODS. Washington.
11. Irimescu A., Mihon L., Pädure G. (2011). Automo-tive transmission efficiency measurement using a chassis dynamometer. Int. J. Automotive Technology, 12(4), pp. 555-559. doi: 10.1007/s12239-011-0065-1
12. Egorov A. V., Belogusev V. N. (2010). Determining the efficiency of asynchronous electric machines using the inertia. Izvestiia Samarskogo nauchnogo tsentra Rossiiskoi akademii nauk, 12(33)(1(2)), pp. 349-352.
13. Egorov A. V., Belogusev V. N. (2010). Non-brake definition of rotary action of electric motors effective characteristics. Kontrol'. Diagnostika, (7), pp. 66-72.
14. Egorov A. V., Belogusev V. N. (2011). The inertial method of assessing the power of mechanical losses in asyn-chronous gear actuator. Remont, vosstanovlenie, modernizatsiia, (6), pp. 34-37.
15. Rotating electrical machines. General test methods. (1986). Ru Standard No. GOST 11828-86–1986. Мoscow: Izdatel’stvo Standartov.
16. Katsman M. M. (2004). Laboratory work on elec-tric machines and electric drive: textbook for college electro-technical specialties. Moscow: Academia.

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

DOI: 10.14489/td.2015.08.pp.058-065

Copy the article DOI and follow the link https://id-spektr.ru/product/pokupka-elektronnoy-stati-iz-zhurnala-kontrol-diagnostika

Please specify the article DOI in the order comments.