10.14489/td.2014.09.pp.063-071

2014, 09 September

DOI: 10.14489/td.2014.09.pp.063-071

Glazkov Yu.A., Shelikhov G.S.
THE ANALYSIS OF THE REASONS OF FORMATION OF INDICATORY DRAWINGS OF FALSE DEFECTS AT CAPILLARY CONTROL
(pp. 63-71)

Abstract. The unitary cycle of capillary control to a two-alternative signs with division of details on suitable, defective, false suitable and false defective is considered. The part of errors of rejection of details is caused by subjective psychological errors made by inspectors in the course of detection and identification of indicatory drawings of defects. Some cases of the admission defects are caused by presence of cracks with the compressed cavity. Rejection of details is caused by formation of false defects, that is, occurrence of the drawings similar to drawings of the valid defects in those zones of control where real defects are usually not present. The most dangerous defects of metal details are extended defects, including cracks of a various origin. Therefore, the basic attention turned on cases of detection of linear extended indicatory drawings of false defects. It is established that false defects can appear in the presence of minor alterations of microgeometry and various admissible damages of a surface of details or the rest of pollution and the sheetings not completely removed at preliminary clearing of details before control. False defects, as a rule, are formed at capillary control of details with application of high-sensitivity materials. For example, at machine-building factories indicatory drawings of false defects can form risks and the scratches which have been trampled down scales of metal, painted thin traces of a gumboil, glue, liquid glass, a thermosheeting and traces of various pollution. Examples of indicatory drawings of false defects are given. An ordered classification of the reasons of formation of indicatory drawings of the false defects similar to cracks is executed. This classification allows to consider the big variety of the specified reasons in certain system. It’s very important to take measures on an exception of false cracks and to facilitate the analysis and identification of indicatory drawings at capillary control.

Keywords: capillary control, detail, indicatory drawing, real defect, false defect, crack, sign, damage, pollution, sheeting, rerejection, classification.

+ - About the Authors Click to collapse

Yu. A. Glazkov
Scientific Regearch Center ERAT, Liubertsy, Moscow Region, Russia.

G. S. Shelikhov
JSC “SPEKTRUM-RII”, Moscow, Russia. E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Kliuev V. V. (Ed.), Sosnin F. R., Borovikov A. S. et al. (1995). Non-destructive testing and diagnostics: handbook. Moscow: Mashinostroenie.
2. Kariakin A. V., Borovikov A. S. (1972). Fluorescent dye penetrant flaw detection. Moscow: Mashinostroenie.
3. Kliuev V. V. (Ed.), Filinov M. V. (2008). Non-destructive testing. Handbook. In 8 volumes. Vol. 4. Book 3. Capillary control. (2nd (Revised and Supplemented) ed., pp. 567-736). Moscow: Mashinostroenie.
4. Beda P. I. (1978). Inspection of parts during opera-tion of aviation equipment. Moscow: Voenizdat.
5. Samoilovich G. S. (Ed.). (1976). Non-destructive test-ing of metals and metal products: handbook. Moscow: Mashinostroenie.
6. Kliuev V. V. (Ed.), Glazkov Iu. A. (2011). Capillary control: textbook. Moscow: Izdatel'skii dom "Spektr".
7. Grunichev A. S., Dolgov V. A., Eliseev V. I. et al. (1976). Assessment of the effectiveness of technical measures to ensure the reliability of REA. Moscow: Sovetskoe radio.
8. Aivazian O. A., Bezhaeva Z. I., Staroverov O. V. (1974). Classification of multivariate observations. Moscow: Statistika.
9. Razumnyi V. M., Tolchenov O. V. (1977). Perfor-mance evaluation of automation devices. Moscow: Energiia.
10. Glazkov Iu. A. (1993). Analysis of factors affecting the efficiency of capillary control. Defektoskopiia, (5), pp. 75-81.
11. Gubinskii A. I., Mozin V. A., Solov'ev A. V. et al. (1970). Generalized time and reliability characteristics of the operator. The reliability of complex systems "Human - Equipment". Part 3. (pp. 34-60). Leningrad: LDNTP.
12. Vudson U., Konover D. (1968). Handbook for en-gineering psychology. Moscow: Mashinostroenie.
13. Glazkov Iu. A. (1998). Peculiarities of capillary control for study of the causes of failures in aviation technology. Kontrol'. Diagnostika, (4), pp. 22-24.
14. Glazkov Iu. A. (1999). The influence of operational deposits on the gas turbine blades on the results of the capil-lary control. Kontrol'. Diagnostika, (4), pp. 13-18.
15. Glazkov Iu. A. (1989). To the question of assessing the effectiveness of a comprehensive non-destructive flaw detection testing. Tekhnicheskaia diagnostika i nerazrushaiushchii kontrol', (4), pp. 14-21.
16. Kliuev V. V. (Ed.), Shelikhov G. S. (2010). Magnetic particle testing. Moscow: Izdatel'skii dom "Spektr".
17. Shelikhov G. S. (2002). Magnetic particle flaw detection in images and photos: practical guidance. Moscow: Diagnosticheskii nauchno-tekhnicheskii tsentr «Defektoskopiia».
18. Non-destructive testing of welded joints. Dye penetrant inspection of welds. Levels of acceptance. (2005). Standard No. EN 1289: 1988. National and international standards in the field of nondestructive testing. Part 4. ISO standards and European standards on the types and methods of non-destructive testing qualification and certification of personnel, requirements to the testing means: collection of documents. Series 28. Vol. 6. Moscow: FGUP «NTTs «Promyshlennaia bezopasnost'», pp. 123 – 126.
19. Magnetic particle testing of welded connections. (1998). Standard No. DIN EN 1291. Berlin: Deutsches Insti-tut für Normung e.V.

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 250 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below: