10.14489/TD.2014.02.PP.070-072

2014, 02 February

DOI: 10.14489/TD.2014.02.PP.070-072

Abramova E.V., Budadin O.N.
IMPLEMENTATION OF THERMAL CONTROL AND WEATHER TESTING OF HEAT PARAMETERS OF HEATPROOF STRUCTURES IN THE BUILDINGS
(pp. 70-72)

Abstract. Heat resistance (and/or thermal resistance) is one of the main parameters to measure heatproof properties of external heatproof structures. Knowledge of the real value of this parameter gives the opportunity to make a conclusion about the building’s condition and estimate its heat loss. The complexity of the measurements is that it’s necessary to obtain the result with 15% error in non-stationary conditions, while the basic regulatory documents are oriented on stationary modes. This article describes the methods of determining the thermal resistance of external heatproof structures during exploitation of buildings and other constructions and a new algorithm for measuring the thermal resistance that is implemented in the device “Thermal resistance measurer” ITS-03-POTOK is proposed.

Keywords: thermal control, heat resistance, heat loss, energy audit, instrumental examination.

+ - About the Authors Click to collapse

Abramova E.V.
Scientific Educational Centre at Bauman Moscow State Technical University, Moscow, Russia. E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

Budadin O.N.
Institute of Thermography, Moscow, Russia.

+ - References Click to collapse

1. The building residential and public. The parameters of the microclimate in the premises. (1996). Ru Standard No. GOST 30494-96. Russian Federation, Moscow.
2. Buildings and structures. Rules of examination and monitoring of the technical state. (2010). Ru Standard No. GOST R 53778-2010. Russian Federation, Moscow.
3. Thermal protection of buildings. (2003). Construction standards and rules No. SNiP 23-02-03. Russian Federation, Moscow.
4. The building residential apartment. (2003). Construction standards and rules No. SNiP 31-01-2003. Russian Federation, Moscow.
5. Public administration buildings. (2003). Construction standards and rules No. SNiP 31-05-2003. Russian Federation, Moscow.
6. Public buildings and constructions. (2000). Construction standards and rules No. SNiP 31-06-2000. Russian Federation, Moscow.
7. Buildings and structures. The method of thermal control of the quality of the thermal protection of protecting structures. (1985). Ru Standard No. GOST 26629-85. Russian Federation, Moscow.
8. Buildings and structures. The method of thermal control of the quality of the thermal protection of protecting structures. (2011). Ru Standard No. GOST R 54852-2011. Russian Federation, Moscow.
9. Buildings and structures. Method for measuring the density of heat flow through protecting structure. (1982). Ru Standard No. GOST 25380-82. Russian Federation, Moscow.
10. Buildings and structures. Methods of determination of resistance to heat transfer by protecting structures. (1984). Ru Standard No. GOST 26254-84. Russian Federation, Moscow.
11. Buildings and structures. Method for determination of heat transfer resistance of constructions by means of calorimeter. Ru Standard No. GOST R 54853-2011. Russian Federation, Moscow.
12. Heterogeneous protecting construction structures. The calculation of the reduced resistance to heat. Ru Standard No. GOST R 54851-2011. Russian Federation, Moscow.
13. Blocks of window and door. Methods of determination of resistance to heat transfer. (1999). Ru Standard No. GOST 26602.1-99. Russian Federation, Moscow.
14. Translucent structures of the facade. Method for determination of reduced resistance to heat. (2011). Ru Standard No. R 54858-2011. Russian Federation, Moscow.
15. Windows and external doors. Methods of determination of resistance to heat transfer. Ru Standard No. GOST R 54861-2011. Russian Federation, Moscow.
16. Pulikovskii K. B. (2007). Methodological recommendations on the procedure of thermal control of technical equipment and facilities used and operated at hazardous production facilities (RD 13-04-2006). Moscow: Nauchno-tekhnicheskii tsentr po bezopasnosti v promyshlennosti.
17. Methodological guidelines on the integrated heat technical inspection of external enclosure structures using the thermal imaging equipment (MDS 23-1.2007). (2007). Moscow: Izdatel'stvo FGUP «NITs «Stroitel'stvo».
18. Method of infrared diagnostics of heat-mechanical equipment (RD.153-34.0 – 20.364-00). (2000). Moscow: ORGRES.
19. The technique of diagnostics and energy audits of the external protecting constructions of thermal contact method: Fr.1.32.2006.02657. (2001). Moscow: Gosstandart RF.
20. Budadin O. N., Potapov A. I., Kolganov V. I. et al. (2002). Thermal non-destructive testing of products. (pp. 139-145). Moscow: Nauka.
21. Budadin O. N., Abramova E. V., Rodin M. A., Lebedev O. V. (2003). Thermal non-destructive testing of buildings and construction structures. Defektoskopiia, (5), pp. 77-94.
22. Abramova E. V., Budadin O. N., Ivanushkin E. F., Slitkov M. N. (2009). Thermal testing method of heat transfer resistance of laminated constructions in non-stationary conditions of heat transfer. Ru Patent No. 2420730. Russian Federation.
23. Abramova E. V., Budadin O. N., Bystrova N. A. et al. (2011). Method of measurement of heat transfer resistance of a multilayer design in real operating conditions and a device for its implementation.
24. Sidenko V. N., Grushko I. M. (1983). Bases of scientific researches. Khar'kov : Vysshaia shkola

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below: