Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 12 | 2024
2014, 04 April

DOI: 10.14489/td.2014.04.pp.012-019 

Makhov V. E., Repin O. S., Potapov A. I.
MEASUREMENT OF LINEAR DIMENSIONS OF MACHINE VISION SYSTEMS IN COHERENT LIGHT
(pp. 12-19)

Abstract. Background. Vision systems are widely used in industry, allow for automated monitoring of geometric parameters of products in real time. Coherent light sources extend the capabilities of vision systems; however, do not apply because of the distinct phenomena of interference and diffraction, and the presence of coherent optical noise (speckle noise) in the image. Therefore, allocation of dominant informational component in the optical image in the presence of speckle noise is a very urgent task. Materials and/or methods. To isolate the dominant information component in the optical image obtained under the lighting coherent source of light is used algorithm wavelet reconstruction signals. To measure the distance between the boundaries of the shadow images used method of finding the coordinates of the maxima of the coefficients of continuous wavelet transform of the reconstructed signal. Results. Studies have shown the possibility to measure the linear dimensions in its reconstruction following the method of continuous wavelet transform into a selected line measuring accuracy of 1.5 pixels, when averaged across multiple lines images is achieved by measuring accuracy of 1 pixel, which corresponds to the accuracy of the standard measurement algorithms used technical systems of view. Conclusion. Use as lighting devices of coherent light sources enhances possibility vision systems, allows for lensless measuring circuits.

Keywords: speckle noise, the wavelet reconstruction, the continuous wavelet the transformation (CWT), a virtual instrument (VI).

 

V. E. Makhov 
National Research University “St. Petersburg State Polytechnic University”, St. Petersburg, Russia. E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

O. S. Repin, A. I. Potapov 
National Mineral Resources University, St. Petersburg, Russia

 

 

 

1. Makhov V. E., Repin O. S. (2012). Issledovanie vozmozhnostei sistem videokontrolia na baze reshenii firmy National Instruments na stankakh rulonnoi pechati. (Study of opportunities of video control systems on the basis of decisions of National Instruments company on the web offset printing machines). Sovremennoe mashinostroenie. Nauka i obrazovanie: materialy 2-i Mezhdunarodnoi nauchno-prakticheskoi konferentsii. (Modern engineering: science and education: Proceedings of the 2nd International scientific and practical conference). St. Petersburg: Izdatel'stvo Politekhnicheskogo universiteta, pp. 500 – 510.
2. Makhov V. E., Potapov A. I. (2011). Application of the algorithm of the continuous wavelet transform in systems of technical vision. Izvestiia vuzov. Priborostroenie, 54(9), pp. 10-15.
3. Dobeshi I. (2001). Ten lectures on wavelets. Izhevsk: NITs «Reguliarnaia i khaoticheskaia dinamika».
4. Makhov V. E., Potapov A. I. (2013). The measuring optical system in a mechanical instability of the control ob-ject. Kontrol'. Diagnostika, (1), pp. 12-21.
5. Makhov V. E., Potapov A. I. (2011). Use the wave-let analysis for diagnostics of technical sight sys-tem. Kontrol'. Diagnostika, (9), pp. 11-18.
6. Makhov V. E., Potapov A. I. (2013). Research measuring the optical system in a non-mechanical stability of the control object. Kontrol'. Diagnostika, (2), pp. 12-23.
7. Makhov E. M., Potapov A. I., Makhov V. E. (2004). Applied optics: the textbook. St. Petersburg: SZTU.
8. Vest Ch. (1982). Holographic interferometry. Mos-cow: Mir.
9. Franson M. (1980). Optics of speckles. Moscow: Mir.
10. Dandliker R., Wolf E. (Ed.). (1980). Heterodyne holographic interferometry. Progress in Optics, 17, pp. 3-84.
11. Makhov V. E., Potapov A. I. (1989). Heterodyne-raster method of quality control of products. Defektoskopiia, (10), pp. 68-84.
12. Shapiro L., Stokman Dzh. (2006). Computer vision. Moscow: Binom. Laboratoriia znanii.
13. Vizil'ter Iu. V., Zheltov S. Iu., Kniaz' V. A. et al. (2007). Processing and analysis of digital images with ex-amples in labview imaq vision. Moscow: DMK Press.
14. Trevis Dzh, Kring Dzh. (2011). Labview for everyone. (4th (Revised and Supplemented) ed.). Moscow: DMK Press.

 

 

This article  is available in electronic format (PDF).

The cost of a single article is 250 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article


Type the characters you see in the picture below



 

 

 

 

 

 

 
Rambler's Top100 Яндекс цитирования