10.14489/td.2014.06.pp.042-049

2014, 06 June

DOI: 10.14489/td.2014.06.pp.042-049

Juravleva L.V., Ivanov A.M., Tinjakov J.N., Sergeeva N.A., Kulik D.V.
CONCEPT OF MEMS SENSOR FOR MONITORING EXTRACTING OIL AND OIL TRANSPORTATION
(pp. 42-49)

Abstract. This paper analyzes the possibility of using MEMS sensors in extracting and transportation of petroleum products in order to create measurement systems, the elements of which are operated at temperatures below minus 60 °C, in icing conditions, water immersion, reliable and maintenance free during the using process. General attention paid to processing parameters such as pressure, temperature, flow rate, the composition of the process, in this case the measurement must be carried out in a continuous mode and in the “field”. It is shown that the classical methods of measurement based on inductive, potentiometric measurement method and the use of steel elastic elements are not suitable for use in the Far North. Finally, recommendations for the use of microelectromechanical systems for monitoring pipeline systems in harsh environments are given.

Keywords: MEMS – mikroelektomechanical systems, transducer, pressure sensors, flow sensors, vibration sensors, transportation of petroleum products, polysilicon, sensing element.

+ - About the Authors Click to collapse

L. V. Juravleva, A. M. Ivanov, D. V. Kulik, N. A. Sergeeva, Yu. N. Tinjakov
Baumen Moscow Technical University, Moscow, Russia. Е-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. ; Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Vaganov V. I. (1983). Integral tensor converter. Moscow: Energoatomizdat.
2. Osadchii E.P. (Ed.). (1979). Designing of sensors for the measurement of mechanical values. Moscow: Mashinostroenie.
3. Evlampiev A. I., Sazhin S. G., Popov E. D., Sumkin P. S. (2012). Leakage detection. Moscow: Izdatel'skii dom "Spektr".
4. Sazhin S. G., Artem'ev B. V., Soboleva E. G. (2013). Industrial analyzers and enhanced efficiency of tech-nological processes. Kontrol'. Diagnostika, (2), pp. 23-27.
5. Sazhin S. G., Artem'ev B. V. (2012). Industrial ana-lyzers of technological environments composi-tion. Zavodskaia laboratoriia. Diagnostika materialov, 78(9), pp. 68-70.
6. Raspopov V. Ia. (2007). Micromechanical devices. Moscow: Mashinostroenie.
7. Denisov A. A., Kal'nov V. A., Shakhnov V. A. (2011). Designing of nanosensors: textbook. Moscow: Izdatel'stvo MGTU im N. E. Baumana.
8. Shakhnov V. A. (Ed.), Bilibin K. I., Vlasov A. I., Zhuravleva L. V. et al. (2002). Mechanician-engineering design of electronic means. Moscow: Izdatel'stvo MGTU im N. E. Baumana.
9. Nesterov Iu. I., Vlasov A. I., Pershin B. N. (2000). Virtual measuring complex. Datchiki i sistemy, (4), pp. 12-22.
10. Myslovskii E. V., Vlasov A. I., Akristinii M. V. (2002). Microcontrollers. Elektronnye komponenty, (5), p. 47.
11. Vlasov A. I., Steshenko V. B., Nesterov V. A., Myslovskii E. V. (2012). Methods of digital signal processing of tactile sensing elements of membrane type. Nauka i obra-zovanie: elektronnoe nauchno-tekhnicheskoe izdanie, (5), p. 37.
12. Odnokol'tsev A. V., Vlasov A. I., Rutkevich A. V. (2012). Non-destructive testing system on the basis of acous-tic emission. Inzhenernyi vestnik, (8), p. 11.

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below: