Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 12 | 2024
2014, 09 September

DOI: 10.14489/td.2014.09.pp.044-048

 

Nikolaev P.M.
APPLYING MEASURED POINTS TO A MATHEMATICAL MODEL USING LOCAL SURFACE LINEARIZATION
(pp. 44-48)

Abstract. Nowadays, measuring machines are commonly used for manufacturing quality control of products coordinate. The results of measure-ments obtained by products scanning are the ordered sets of points. Measured points are compared with a mathematical model to determine various parameters of manufacturing quality. The main problem in the comparison of measurement results with the mathematical model is the difference of their coordinate systems. It is necessary to produce the combination of measured points with a mathematical model by means of a rotation and translation of the coordinate systems. The criterion of best fit is the least distances sum from the measured points to the surface of the model. Complete solution to the problem of combining points with the model is not currently available. Known algorithms, based on the distance minimization between the measured points and the corresponding points on the surface of the model, work unsatisfactory on surfaces with a small curvature. In the paper a description of the algorithm combining the measured points with a mathematical model of a complex shape is presented. The proposed algorithm is based on minimizing the distance between the measured points and the locally linearized surface. To achieve the best combination an iterative cycle is used. Using of surface linearization significantly increases the speed of convergence and the domain of combining the measured points and model. Algorithm calculates displacement and rotation angles for the best match measured points with the mathematical model.

Keywords: surface linearization, complex shape, manufacturing accuracy, measured points, distance minimization.

 

P. M. Nikolaev
Сentral Alrohgdrodynamic Institute (TsAGI), Zhukovsky, Moscow Region, Russia. E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

 

 

1. Dunin-Barkovskii I., Zhuravlev A., Korotkov V. (1972). Interchangeability and technical measurements in machine-building. Moscow: Mashinostroenie.
2. Granovskii V., Siraia T. (1990). Methods of experimental data processing in measurements. Leningrad: Energoatomizdat.
3. Vermel' V. D., Drozdovskii A. Iu., Zabaluev V. F., Nikolaev P. M. (2010). Evaluation of the precision of the aerodynamic model of the aircraft. Pribory, (8), pp. 23-29.

 

 

This article  is available in electronic format (PDF).

The cost of a single article is 250 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article


Type the characters you see in the picture below



 

 

 

 

 

 
Rambler's Top100 Яндекс цитирования