Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 12 | 2024
2016, 12 December

DOI: 10.14489/td.2016.12.pp.004-009

 

Badalyan V. G.
EVALUATION OF ULTRASONIC INSPECTION RELIABILITY IN AUSTENITIC WELDED JOINTS (WITH USE OF COHERENT SYSTEMS)
(pp. 4-9)

Abstract. One of the characteristics to assess the effectiveness of the methods and apparatus of ultrasonic testing is the dependence of the probability of defects detection byits size. We study the behavior of PoD(a) – the defects detection function for cracks in the austenitic weld which describes the dependence of the probability of defectsdetection, from their height. All presented PoD-curves were plotted based on the results of ultrasonic testing (UT), obtained with the use of Augur automated systems with coherent data treatment or manual inspection. Results of ultrasonic testing of 24 austenite welded joints containing 61cracks were used. The maximum cracksheight was identified by the results of metallographic studies. PoD-curves for automated ultrasonic testing obtained with different mutual position of acoustic transducers, the defect and the weld joint.It allowsto assess the impact of the austenite in welds on the detection of cracks. PoD-curves obtained with automatic and manual testingshow significantly greater reliability of automated ultrasonic testing. Analysis of the results, complemented by the construction of the PoD-curves corresponding to individual groups of inspectors (three groups on manual and automated ultrasonic testing). It is shown that the probability of defects detecting with manual control is connected with the non-certainty in testing results evaluationin small and medium areas of defects heights due to increased noise (for low heights) and the complexity of separating signals from defects and bottom (for medium heights).

Keywords: ultrasonic testing, AUT, manual ultrasonic testing, Augur, acoustic image, the coherent processing, detection, PoD-curve.

 

V. G. Badalyan (Co Ltd “Scientific Production Center of Nondestructive Ultrasonic Testing “ECHO+”, Moscow, Russia)  Е-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

 

 

1. Ivanov V.I., Konovalov N.N., Kotelnikov V.S., Kotelnikov V.V., Musatov V.V. (2015). Risk assessment of failure with use of technical diagnosing. Kontrol'. Diagnostika, (3), pp. 12 – 20. [in Russian language] doi: 10.14489/td.2015.03.pp.012-020.
2. Badalian V. G., Vopilkin A. Kh. (1993). Computer aided system for ultrasonic inspection. Defektoskopiia, (5), pp. 7 – 13. [in Russian language]
3. Samokrutov A. A., Sokolov N. Iu., Shevaldykin V. G. (2014). Automated testing of welded joints using ultrasound antenna lattices. Kontrol'. Diagnostika, (3), pp. 100-104. [in Russian language] doi: 10.14489/td.2014.03.pp.100-104.
4. Advances in phased array ultrasonic technology applications. (2007). Olympus NDT. Available at: http://www.olympus-ims.com/en/books/ (Acessed: 14.06.2016)
5. Badalian V. G. (2007). Assessing test results on the basis of acoustic images. Defektoskopiia, (4), pp. 39-58. [in Russian language] doi: 10.1134/S1061830907040055
6. Badalian V. G. (2003). Error in measurements of flaws with the use of systems with coherent data processing. Defektoskopiia, (3), pp. 12-23. [in Russian language] doi: 10.1023/B:RUNT.0000009070. 23189.ff
7. Badalian V. G., Vopilkin A. Kh. (2004). Monitoring of welded joints of pipelines using an automated ultrasonic inspection systems with coherent data processing. V mire nerazrushaiushchego kontrolia, (4), pp. 22 – 27. [in Russian language]
8. Berens A. P. (2000). Probability of detection (PoD) analysis for the advanced retirement for cause (RFC). Engine structural integrity program (ENSIP) Nondestructive evaluation (NDE) system development. Volume 1 – PoDanalysis. Final Report 2000, р. 88. AFRL-ML-WP-TR-2001-4010.
9. Georgiou G. A. (2006). Probability of detection (PoD) curves. Derivation, applications and limitations: Research report N 454.
10. Kruglov B. A. (2002). Functions detection of the cracks at operational ultrasonic testing of VVER-1000 with SK187 system. Voprosy materialovedeniia, (4), pp. 107 – 118. [in Russian language]
11. Jenson F., Iakovleva E., C. Reboud F. (2009). Evaluation of POD curves based on simulation results. 7th Intern. Conf. on NDE in Relation to Structural Integrity for Nuclear and Pressurised Components.
12. Spies M., Rieder H. (2009). Enhancement of the POD of flaws in the bulk of highly attenuating structural materials by using SAFT processed ultrasonic inspection data. 4th European-American Workshop on Reliability of NDE.
13. Aleshin N. P., Vadkovskii N. N., Volkova N. N. (1988). Ultrasonic testing of austenitic welds: analysis of the methods and recommendations to improve reliability. Defektoskopiia, (2), pp. 43-59. [in Russian language]
14. Ogilvy I. A. (1986). Ultrasonic beam profiles and beam propagation in austenitic weld using a theoretical ray tracing model. Ultrasonics, (11), pp. 337-347. doi: 10.1016/0041-624X(86)90005-3
15. Badalian V. G., Vopilkin A. Kh. (2000). Experience of using ultrasound system with coherent data processing «Avgur» at Russian NPPs. Kontrol'. Diagnostika, (9), pp. 35 – 39. [in Russian language]
16. Carvalho A. A., Rebello J. M. A., Silva R. R., SSagrilo L. V. (2006). Reliability of the manual and automatic ultrasonic technique in the detection of pipe weld defects. Insight, 48(11), pp. 1-6. doi: 10.1784/insi.2006.48.11.649
17. Lilley J. (2006). The integration of plant condition assessment with risk management programmes. 9th Europ. Conf. on Non Destructive Testing.
18. Grebennikov V. V., Grebennikov D. V., Badalian V. G., Vopilkin A. Kh. (2001). Holographic methods of ultrasonic testing of austenitic welds. V mire nerazrushaiushchego kontrolia, 14(4), pp. 36-38. [in Russian language]
19. Badalian V. G., Vopilkin A. Kh., Dolenko S. A. et al. (2004). Data-processing algorithms for automatic operation of ultrasonic systems with coherent data processing. Defektoskopiia, (12), pp. 3-15. [in Russian language] doi: 10.1007/s11181-005-0108-7
20. Bazulin E. G. (2014). Determination of the reflector type from an image reconstructed using echo signals measured with ultrasonic antenna arrays. [in Russian language] Defektoskopiia, (3), pp. 12 – 22. doi: 10.1134/S1061830914030036

 

 

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article


Type the characters you see in the picture below



 

 

 
Rambler's Top100 Яндекс цитирования