10.14489/td.2017.02.pp.018-027

2017, 02 February

DOI: 10.14489/td.2017.02.pp.018-027

Danilov V. N., Razygraev A. N., Kobernik А. V.
MODELING AN ACOUSTIC CHANNEL OF AN ANGLE DUAL PROBE OF LONGITUDINAL WAVES FOR A CYLINDRICAL REFLECTOR
(pp. 18-27)

Abstract. On the basis of a model of acoustic channel direct dual probe of longitudinal waves for cylindrical reflector the model of channel for angle dual probe with identical parameters of radiating and reception parts is developed. Definition of a wedge angle and a corner of direction on the point of reflection in plane of the control is carried out by the numerical decision of system from two transcendental equations in view of the angle of turn of the angle dual probe influencing both on position of focus and on amplitude of signal in it. This position of the point of reflection on cylindrical hole which varies on parameters of the angle dual probe and its arrangement also is defined. Examples of calculation of signal angle dual probe for various parameters are given and opportunities of influence on its sensitivity are shown.

Keywords: angle dual probe, longitudinal wave, piezoplate, wedge angle, focal point, angle of a turn, directivity characteristic, probe axis, cylindrical reflector, displacement of a reflection point.

+ - About the Authors Click to collapse

V. N. Danilov, A. N. Razygraev, A. V. Kobernik (JSC “RPA “CNIITMASH”, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Razygraev N. P., Ermolov I. N. (1981). Detectors for testing pre surface layer with head waves. Defektoskopiia, (1), pp. 53-62. [in Russian language]
2. Danilov V. N., Razygraev A. N., Kobernik A. V. (2016). Modeling the activity of a direct dual probe. Kontrol'. Diagnostika, (6), pp. 21-35. doi: 10.14489/td.2016.06.pp.021-035 [in Russian language]
3. Ermolov I. N. (1981). Theory and practice of ultrasonic inspection. Moscow: Mashinostroenie. [in Russian language]
4. Klyuev V.V. (Ed.), Ermolov I. N., Lange Iu. V. (2006). Nondestructive testing. Handbook. In 8 volumes. Vol. 3. Ultrasonic inspection. 2nd Ed. (revised and complemented). Moscow: Mashinostroenie. [in Russian language]
5. Razygraev N. P. (1984). Ultrasonic testing of cracking under austenitic anticorrosion weld. Defektoskopiia, (2), pp. 60-66. [in Russian language]
6. Shcherbinskii V. G., Aleshin N. P. (2000). Ultrasonic testing of welded joints. 3rd Ed. Moscow: Izdatel'stvo MGTU im N. E. Baumana. [in Russian language]
7. Welded joints and welding equipment of nuclear power plants. Methods of ultrasonic inspection. (1980). Industry Standard No. OST 108.004.108–80. Moscow: NPO «TsNIITMASh». [in Russian language]
8. Method of ultrasonic testing of joint (austenitic) welded pipe connections of main circulation circuit of the Du-500. (1993). Methodical instructions No. MTsU-5-28–93. Moscow: NPO «TsNIITMASh». [in Russian language]
9. Methods of ultrasonic inspection of welded connections (composite) of the pipe for the output tubes gauge and differential measure device with WWER-440 housing. (1993). Methodical instructions No. MTsU-14–98. Moscow: NPO «TsNIITMASh». [in Russian language]
10. Razygraev N. P., Razygraev A. N. (2006). Ultrasonic testing of austenite welded joints in Du-300 pipelines. Defektoskopiia, (10), pp. 59-71. [in Russian language]
11. Danilov V. N., Razygraev A. N., Kobernik A. V. (2016). The formulas of an acoustic channel of the direct dual probe for different reflectors. Kontrol'. Diagnostika, (7), pp. 11-24. doi: 10.14489/td.2016.07.pp.011-024 [in Russian language]
12. Danilov V. N. (2011). On the directivity characteristic of an angle transducer in the reception mode. Defektoskopiia, (4), pp. 35-49. [in Russian language]
13. Danilov V. N. (2009). Calculation of acoustic field of angle beam probe in the far field zone. Defektoskopiia, (12), pp. 36-51. [in Russian language]
14. Aleshin N. P. (Ed.), Belyi V. E., Vopilkin A. Kh. et al. (1989). Methods for acoustic testing of metal. Moscow: Mashinostroenie. [in Russian language]
15. Danilov V. N. (2010). Calculation of DGS diagrams of angle beam probe. Defektoskopiia, (5), pp. 45-65. [in Russian language]
16. D'iakonov V. P. (1989). Handbook of algorithms and programs on BASIC language for PC. Moscow: Nauka. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below: