10.14489/td.2017.07.pp.050-055

2017, 07July

DOI: 10.14489/td.2017.07.pp.050-055

Anisimova M. A., Blagoveshchenskiy D. I., Nuzhdin G. A.
METROLOGICAL SUPPORT IN NDT EQUIPMENT PRODUCTION
(pp. 50-55)

Abstract. One of changes in the new version ISO 9001:2015 concerns metrological support requirements. The previous version ISO 9001:2008 included the firm requirement for registration and an assessment of the measurements results received on the faulty equipment. The corresponding point 7.6 ISO 9001:2008 “The monitoring and measurements equipment control” also contained the firm requirement for these obligatory records control. Similar requirements in the new ISO 9001:2015 version are softened. The organization has to define now only competency of the previous measurement results if it was revealed that the measuring equipment is unsuitable for application on his direct appointment. And then the organization can take the corresponding actions if it is necessary. There is obviously not enough in real working conditions. The work purpose is to fulfill requirements for metrological support of the measuring equipment functional suitability and the required accuracy in the NDT equipment (mobile industrial gamma-ray detectors) production based on EMI, JSC (Moscow). That is why the task is to confirm standards coherence in the certified management system conditions and to develop recommendations about the monitoring and measurements resource management. The works complex on the integrated management system preparation, introduction and certification has been carried out in EMI, JSC. It has been analytically and continuity confirmed the majority of metrological support requirements have passed from previous ISO 9001:2008 into the new version ISO 9001:2015 as a result. The coordinated application of requirements for metrological support (GOST R 8.820) and monitoring and measurements resources (ISO 9001:2015) was used in the NDT equipment (mobile industrial gamma-ray detectors) production based on EMI, JSC (Moscow). It is shown that it is necessary to keep surely the firm requirement for registration and an assessment of the measurements results received on the faulty equipment. And system actions concerning risks and opportunities at measurements need to be reflected in the Ensuring Quality Program.

Keywords: metrological support, management system, measuring instruments, NDT equipment.

+ - About the Authors Click to collapse

M. A. Anisimova (Federal State Budgetary Educational Establishment of Higher Education “Tula State University” (TulSU), Tula, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
D. I. Blagoveshchenskiy (Federal Budgetary Institution “The State Regional Center of Standardization, Metrology and Tests in Tula Region” (FBI “Tulsky CSM”), Tula, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
G. A. Nuzhdin (National University of Science and Technology MISiS (NUST MISiS), Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. GSOEI. Metrological support. Basic provisions. (2014). Ru Standard No. GOST Р 8.820–2013. Moscow: Standartinform. [in Russian language]
2. Anisimova M. A., Kazeeva Iu. N., Pavele L. A., Nuzhdin G. A. (2010). Monitoring of educational activity with method of structuring the quality function. Kontrol'. Diagnostika, (6), pp. 46-49. [in Russian language]
3. Griazev M. V., Grigorov I. V., Nuzhdin G. A., Pavele L. A. (2011). New method of educational process quality control in higher professional education institutions. Kontrol'. Diagnostika, (3), pp. 38-42. [in Russian language]
4. Bazunov A. V., Nikulin S. A., Razumeiko B. G. et al. (1998). The system of rating testing of the preparation level for higher education. Ru Patent No. 2145442. Russian Federation. [in Russian language]
5. Volokitina I. V., Protas'ev V. B., Nuzhdin G. A. (2008). Metrology in higher education. Tool for assessing effectiveness. Spravochnik. Inzhenernyi zhurnal, (6), pp. 47-48. [in Russian language]
6. Federal state educational standard of higher education for the specialty 22.03.01 Materials science and materials technology (Bachelor's level). (2015). Order of Ministry of Education and Science No. 1331. 12 November 2015. Russian Federation. Moscow. [in Russian language]
7. Federal state educational standard of higher education for the specialty 15.04.05 Design and technological support of machine-building productions (master's level). (2014). Order of Ministry of Education and Science No. 1485. 12 November 2015. Russian Federation. Moscow. [in Russian language]
8. Metrological support of product testing for the purpose of conformity assessment. Basic Provisions. Ru Standard No. GOST R 51672–2000. Moscow: Standartinform. [in Russian language]
9. Quality management systems. Requirements. (2015). Standard No. GOST R ISO 9001–2015. Moscow: Standartinform. [in Russian language]
10. Quality management systems. Requirements. (2011). Standard No. GOST R ISO 9001–2011. Moscow: Standartinform. [in Russian language]
11. GSOEI. Certification of test equipment. Basic Provisions. Moscow: Standartinform. Ru Standard No. GOST R 8.568–97. Russian Federation. Moscow. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below: