|
DOI: 10.14489/td.2017.11.pp.026-031
Sandomirski S. G.
USING THE PARAMETERS OF THE SATURATION HYSTERESIS LOOP FOR THE SYNTHESIS OF STRUCTURE-SENSITIVE MAGNETIC PARAMETERS OF STEELS
(pp. 26-31)
Abstract. It is shown that the “multiparameter” methods of magnetic structuroscopy, based on the measurement of magnetic parameters, the accuracy of which is not high, can not provide reliable control of the structure of steels. The developed formulas for calculating the maximum, initial and maximum differential permeability’s, all the relaxation magnetic parameters of steels based on their coercive force Нc , the remanent magnetization Mr and the saturation magnetization Ms measured on the saturation magnetic hysteresis loop are presented. Parameters, which are sensitive to structural changes in steels, are proposed to be formed from Нc , Mr and Ms . Examples of such parameters are given. It is shown that the structural sensitivity of these parameters is higher or no worse than the structural sensitivity of Нc , Mr , magnetic permeability’s and relaxation magnetic parameters, and they can be measured more simply and more accurately.
Keywords: Non-destructive testing, magnetic structural analysis, magnetic measurements, remanent magnetization, coercive force, saturation magnetization.
S. G. Sandomirski (Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Belarus) E-mail:
Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
1. Klyuev V. V. (Ed.), Muzhitskii V. F., Gorkunov E. S., Shcherbinin V. E. (2006). Nondestructive testing: handbook. In 8 volumes. Vol. 6. Book 1. Magnetic testing methods. 2nd Ed. (revised and supplemented). Moscow: Mashinostroenie. [in Russian language]
2. Apaev B. A. (1973). Phase magnetic analysis of alloys. Moscow: Metallurgiia. [in Russian language]
3. Chernyshev E. T., Chechurina E. N., Chernysheva N. G., Studentsov N. V. (1969). Magnetic measurements. Moscow: Izdatel'stvo standartov. [in Russian language]
4. Bida G. V., Nichipuruk A. P. (2005). Magnetic properties of the heat treated steels. Ekaterinburg: UrO RAN. [in Russian language]
5. Bida G. V., Stashkov A. N. (2003). Multipurpose use of magnetic properties of steels in nondestructive testing of the quality of heattreated workpieces. Defektoskopiia, (4), pp. 67-74. [in Russian language]
6. Mel'gui M. A. (2015). Multiparameter methods in magnetic structuroscopy and instruments for their realization (Review): II. The pulsed magnetic multiparameter method and IMA-M instrument for its performance. Defektoskopiia, (3), pp. 11-26. [in Russian language]
7. Sandomirskii S. G. (2013). Analysis of the methodical error in measuring the magnetization of the steels in the process of coercive return. Izmeritel'naia tekhnika, (2), pp. 57-60. [in Russian language]
8. Sandomirskii S. G. (2014). Influence of measurement accuracy and range of variation of the physical quantity on the correlation coefficient between its actual values and measurements. Izmeritel'naia tekhnika, (10), pp. 13-17. [in Russian language]
9. Sandomirskii S. G. (2013). The structure sensitivity of the maximum permeability μm. Part 1. Kontrol'. Diagnostika, 186(12), pp. 33-38. [in Russian language]
10. Sandomirskii S. G. (2011). (2011). Estimation of initial magnetic permeability of steels according to coercive force and residual magnetization. Stal', (9), pp. 57-60. [in Russian language]
11. Sandomirskii S. G. (2015). Sandomirskii S. G. (2015). Analysis of changes in the maximum differential permeability of steels due to heat treatment modes. Stal’, (8), pp. 71-75. [in Russian language]
12. Sandomirskii S. G. (2010). Computing the relaxation magnetization of ferromagnetic material based on saturation magnetization, and remanent magnetization. Kontrol'. Diagnostika, (5), pp. 8-11. [in Russian language]
13. Sandomirskii S. G. (2010). Calculation of the relaxation coercive force of a ferromagnetic material. Elektrichestvo, (7), pp. 55-58. [in Russian language]
14. Sandomirskii S. G. (2010). Computing the relaxation magnetic receptivity of steels. Kontrol'. Diagnostika, (11), pp. 15-19. [in Russian language]
15. Sandomirskii S. G. (2012). Analysis of the structural and phase sensitivity of the magnetization of the coercive steels return. Stal’, (8), pp. 61-65. [in Russian language]
16. Mikheev M. N., Morozova V. M. (1964). Magnetic and electric properties of various types of steel after heat treatment. Moscow: ONTI po priborostroeniiu TsNIIKA. [in Russian language]
17. Kostin K. V., Kostin V. K., Smorodinskii Ia. G. et al. (2011). Choice of the parameters and algorithm for the magnetic hardness testing of thermally treated carbon steels by the method of regression modeling. Defektoskopiia, (2), pp. 3-11. [in Russian language]
18. Kostin V. N., Tsar'kova T. P., Sazhina E. Iu. (2001). Measurements of relative magnetic parameters of materials in tested components incorporated in closed circuits. Defektoskopiia, (1), pp. 15-26. [in Russian language]
19. Sandomirskii S. G. (2017). Synthesis of structurally sensitive magnetic parameters of steels from the parameters of their limiting loop of magnetic hysteresis. Proceedings of the XXI All-Russian conference on nondestructive testing and technical diagnostics. Moscow, 28 February – 2 March 2017, (pp. 246-261). Moscow: Izdatel'skii dom «Spektr». doi: 10.14489/4442-0125-1 [in Russian language]
20. Tikadzumi S. (1987). Physics of ferromagnetism. Magnetic characteristics and practical applications. Moscow: Mir. [in Russian language]
This article is available in electronic format (PDF).
The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.
After depositing your payment on our bank account we send you file of the article by e-mail.
To order articles please fill out the form below:
|
">
Разработка концепции и создание сайта - ООО «Издательский дом «СПЕКТР»