10.14489/td.2018.03.pp.052-057

2018, 03 March

DOI: 10.14489/td.2018.03.pp.052-057

Mokritskii B. Ya., Mokritskaya E. B.
COMPARATIVE EVALUATION OF ELASTIC PROPERTIES OF TOOL MATERIALS BY PENDULUM SCRIBING
(pp. 52-57)

Abstract. When choosing the right tool material from several available and especially in the development of new tool materials is an important criterion, the magnitude of the elastic modulus. But to determine the need for special samples of the material, using special equipment and technology of sample preparation. Not every consumer of cutting tools can have. He needs quickly and simply from existing dial to choose the tool material, which will have the required performance properties. Including elastic properties.Proposed technical solution which allows to solve this problem through the use of the advantages of the pendulum scribing.

Keywords: pendulum scribing, hole rebound, deformation hardening.

+ - About the Authors Click to collapse

B. Ya. Mokritskii (Komsomolsk-on-Amur State Technical University, Komsomolsk-on-Amur, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
E. B. Mokritskaya (Far Eastern Federal University, Komsomolsk-on-Amur, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Hard sintered alloys. Method for determining the modulus of elasticity. Ru Standard No. GOST 25095–82 (ISO 3312–75). [in Russian language]
2. Konev S. F., Shibalenkov N. A., Shibalenkov D. N. (2003). Method for determining the modulus of carbon bundles elasticity. Ru Patent No. 2205387. Russian Federation. [in Russian language]
3. Iavorskii B. M., Detlaf A. A. (1985). Handbook on physics. Moscow: Nauka. [in Russian language]
4. Semashko N. A., Mokritskaia E. B., Filonenko S. F. (1999). Method for testing the physical and mechanical properties of the products. Ru Patent No. 2138038. Russian Federation. [in Russian language]
5. Semashko N. A., Mokritskaia E. B., Mokritskii B. Ia., Filonenko S. F. (1999). Method for testing the properties and diagnostics of the destruction of a product. Ru Patent No. 2138039. Russian Federation. [in Russian language]
6. Mokritskaia E. B., Semashko N. A., Mokritskii B. Ia., Vakhrushev O. M. (1999). Method of acoustic testing of crack resistance of the products. Ru Patent No. 2140076. Russian Federation. [in Russian language]
7. Pustovalov D. A., Mokritskii B. Ia., Konnova G. V. (2015). Selection of rational instrumental materials using the scribing method. Vestnik mashinostroeniia, (7), pp. 77-80. [in Russian language]
8. Mokritskii B. Ia., Pustovalov D. A., Altukhova V. V. et al. (2016). A method for comparative evaluation of the properties of materials based on the parameters of the pendulum scribing track. Zavodskaia laboratoriia. Diagnostika materialov, (4), pp. 52-59. [in Russian language]
9. Mokritskii B. Ia., Pustovalov D. A., Bezden' D. N., Sablin P. A. (2015). A method of comparative evaluation of the properties of materials with respect to the total length of the pendulum scribing track to the length of the rebound well. Ru Patent No. 2539116. Russian Federation. [in Russian language]
10. Mokritskii B. Ia., Pustovalov D. A., Panova E. A. et al. (2015). Method of comparative evaluation of the properties of materials along the length between the well and the main part of the indentor trace with pendulum scribing. Ru Patent No. 2539725. Russian Federation. [in Russian language].
11. Mokritskii B. Ia., Pustovalov D. A., Panova E. A. et al. (2015). Method for comparative evaluation of the properties of materials based on the parameters of the rebound well in the trace of the indenter with pendulum scribing. Ru Patent No. 2543682. Russian Federation. [in Russian language].
12. Mokritskii B. Ia., Pustovalov D. A., Bezden' D. N., Sablin P. A. (2015). Method for comparative evaluation of the properties of materials with respect to the length of the hole to its width in the trace of the indenter with pendulum scribing. Ru Patent No. 2543683. Russian Federation. [in Russian language].

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2018.03.pp.052-057

and fill out the form