Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 12 | 2024
2020, 09 September

DOI: 10.14489/td.2020.09.pp.057-064

Uzkikh A. А., Iskhuzhin R. R., Atavin V. G.
EXPERIENCE OF USING ACOUSTIC FLAW DETECTORS ID-91M AND AD-60K IN ASSESSING THE QUALITY OF MULTILAYER STRUCTURES
(pp. 57-64)

Abstract. The article considers the experience of using acoustic flaw detectors ID-91M and AD-60K for non-destructive control of the continuity of filling gaps with Vixint-K18 sealant, quality control of composite material based on organoplastics and construction of boroaluminium composite materials. The analysis of publications on the issue under consideration is performed. A list of publications from 15 sources is presented. An analysis of the continuity of filling gaps with a sealant was carried out with the construction of diagrams of the distribution of signal amplitudes across the scanning zones. The measurement results are presented in the figures in the form of a color scheme by selected amplitude scale. The effect on the results of changes in the edge effect is shown, insufficient locality of the sensors used is noted. For structures made of composite materials based on organoplastics and boroaluminum material, dependences of signal amplitudes on the depth of imitators of defects of various sizes are constructed. A static analysis of the measurement results from each of the defect simulators is performed. Good reproducibility of the acoustic signal for specific simulators is shown. The dependences of the signal amplitudes on the layer thickness to the defect simulator are constructed for two different transducers (RSP-60 and SP-60). It is proposed that the SP-60 transducer with less sensitivity but with a monotonic characteristic will be used for a rough estimation of measurement results, and the RSP-60 transducer, with a higher sensitivity but with non-monotonic characteristic, will be used to refine the results. Studies have shown the effectiveness of using acoustic flaw detectors ID-91M and AD-60K with non-destructive testing of the quality of manufacturing a number of structures from multilayer composite materials. Based on the results of the studies, the optimal settings for flaw detectors for various types of controlled parts were selected, a non-destructive testing method for structures by the acoustic method was developed and certified, and metrological parameters of the method were evaluated.

Keywords: nondestructive check, acoustic method, impedance, composite materials.

A. А. Uzkikh, R. R. Iskhuzhin, V. G. Atavin (Federal State Unitary Enterprise “Russian Federal Nuclear Center – Zababakhin All-Russia Research Institute of Technical Physics”, Chelyabinsk, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

1. Lange Yu. V. (1991). Acoustic low-frequency methods and means of non-destructive testing of multilayer structures. Moscow: Mashinostroenie. [in Russian language]
2. Klyuev V. V. (Ed.), Ermolov I. N., Lange Yu. V. (2008). Non-destructive testing: reference book: in 8 volumes. Vol. 3. Ultrasonic testing. 2nd ed. Moscow: Mashinostroenie. [in Russian language]
3. Murashov V. V. (2016). Control and diagnostics of multilayer structures made of polymer composite materials by acoustic methods. Moscow: ID «Spektr». [in Russian language]
4. Bakunov A. S., Murashov V. V., Sysoev A. M. (2012). Control of propeller blades by means of low-frequency acoustics. Kontrol'. Diagnostika, (6), pp. 72 – 74. [in Russian language]
5. Murashov V. V., Slyusarev M. V. (2016). Detection of cracks in parts made of polymer composite materials and in multilayer glued structures using a low-frequency acoustic method. Defektoskopiya, (6), pp. 27 – 34. [in Russian language]
6. Murashov V. V. (2016). Quality control of products made of polymer composite materials by acoustic methods. Kontrol'. Diagnostika, (12), pp. 16 – 29. [in Russian language] DOI: 10.14489/td.2016.12.pp.016-029
7. Sviridov Yu. B., Slyadnev A. M. (2017). Investigation of acoustic processes in the impedance method of monitoring products using longitudinal waves. Kontrol'. Diagnostika, (9), pp. 54 – 61. [in Russian language] DOI: 10.14489/td.2017.09.pp.054-061
8. Azarov N. T., Mikolaychuk Yu. A., Syrbu V. N., Tsirg V. N. (2003.). Inspection of glued honeycomb struc-tures of aircraft with an impedance flaw detector DAMI-S. V mire nerazrushayushchego kontrolya, (3), pp. 16 – 29. [in Russian language]
9. Starikovskiy G. P., Zhovner P. B. (2012). Non-destructive testing of three-layer integral structures made of polymer composite materials. Kontrol'. Diagnostika, (6), pp. 57 – 62. [in Russian language]
10. Murashov V. V. (2017). Study of the characteristics of the acoustic method of free vibrations. Kontrol'. Diagnostika, (3), pp. 4 – 10. [in Russian language] DOI: 10.14489/td.2017.03.pp.004-010
11. Generalov A. S., Boychuk A. S., Chertishchev V. Yu. et al. (2017). Revealing delamination and non-adhesives in 5- and 7-layer honeycomb parts and structural elements made of PCM using the acoustic method. Klei. Germetiki. Tekhnologii, (3), pp. 23 – 26. [in Russian language]
12. Chertishchev V. Yu., Boychuk A. S., Dikov I. A. et al. (2018). Determination of the depth of occurrence of defects in multilayer structures made of PCM by acoustic methods by the value of mechanical impedance. Defektoskopiya, (8), pp. 21 – 34. [in Russian language]
13. Slyadnev A. M. (2019). Acoustic non-destructive testing of multilayer PCM structures in the production and operation of aircraft. Kontrol'. Diagnostika, (10), pp. 36 – 49. [in Russian language] DOI: 10.14489/td.2019.10.pp.036-049
14. Murashov V. V., Yakovleva S. I. (2017). Application of the acoustic method of free vibrations to control structures containing layers of non-metallic materials. Kontrol'. Diagnostika, (10), pp. 28 – 35. [in Russian language] DOI: 10.14489/td.2017.10.pp.028-035
15. Murashov V. V., Generalov A. S. (2014). Inspection of multilayer glued structures with low-frequency acoustic methods. Aviatsionnye materialy i tekhnologii, 31(2), pp. 59 – 67. [in Russian language]

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2020.09.pp.057-064

and fill out the  form  

 

 

 
Rambler's Top100 Яндекс цитирования