10.14489/td.2021.01.pp.032-037

2021, 01 January

DOI: 10.14489/td.2021.01.pp.032-037

Mokritskii B. Ya.
CONTROL OF CUTTING MODE PARAMETERS AND TOOL MATERIAL TO ENSURE THE VALUES OF ROUGHNESS PARAMETERS WHEN TURNING STEELS 09H17N7YU, 12H18N10T AND 13H15N5 AM-3
(pp. 32-37)

Abstract. When processing hard-to-process stainless steels, it is difficult to maintain a compromise between the quality of the treated surface, processing performance and the period of operation of the cutting tool to the permissible value of its wear. The more specialized the physical and mechanical characteristics and performance properties of such steel, the more difficult it is to reach a compromise. The paper shows the results of controlling the parameters of the cutting mode to ensure the required roughness parameters when turning highly corrosion-resistant stainless steels 09H17N7YU, 12H18N10T and 13H15N5 AM-3.

Keywords: roughness when turning stainless steels, parameters of the cutting mode, control of the values of roughness parameters.

+ - About the Authors Click to collapse

В. Ya. Mokritskii (Komsomol-on-Amur state University, Komsomol-on-Amur, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Bezyazychniy V. F., Timofeev M. V., Baskov M. V. (2019). Modeling of thermophysical processes in the cutting zone taking into account volumetric heat sources. Stanki i instrument, (2), pp. 33 – 37. [in Russian language]
2. Bezyazychniy V. F. (2012). Similarity method in engineering technology. Moscow: Mashinostroenie. [in Russian language]
3. Bezyazychniy V. F., Baskov M. V. (2017). Influence of coatings on the quality parameters of the surface layer of processed parts. Uprochnyayushchie tekhnologii i pokrytiya, 13(8), pp. 348 – 352. [in Russian language]
4. Fomenko R. N. (2010). Investigation of the processing process by turning with nanocoated tools in order to ensure the required quality of the surface layer of parts. Rybinsk. [in Russian language]
5. Zhijun Lin, Lin Wang, Jianzhong Zhan, et al. (2009). Nanocrustalline tungsten carbide: As incompressible as diamond. Applied Physics Letters, Vol. 95, 21.
6. Grigor'ev S. N., Tabakov V. P., Volosova M. A. (2011). Technological methods of increasing the wear resistance of contact pads of the cutting tool: monograph. Stariy Oskol: TNT. [in Russian language]
7. Vereschaka A., Mokritskii B., Mokritskaya E. et al. (2017). Two-component end mills with multilayer composite nano-structured coatings as a viable alternative to monolithic carbide end mills. Mechanics & Industry, Vol. 18, 17. Available at: https://doi.org/10.105 1/meca/2017052
8. Vereshchagin V. Yu., Mokritskiy B. Ya., Vereshchagina A. S. (2018). Methodology for selecting an effective coating based on modeling stresses in the cutting tool. Metalloobabotka, 104(2), pp. 19 – 22. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 450 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2021.01.pp.032-037

and fill out the form