Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 11 | 2024
2021, 09 September

DOI: 10.14489/td.2021.09.pp.034-041

Zaznobin V. A., Nekrasov A. V., Pankratov A. V.
INVESTIGATION OF TRANSVERSE CRACKS IN ANNULAR WELDED JOINTS OF MAIN GAS PIPELINES LINEAR PART
(pp. 34-41)

Abstract. Statistics of accidents and incidents on main gas pipelines in recent years indicate that almost half of the technogenic events occur due to depressurization in the area of annular welded joints, mainly joints containing defects made during construction and installation work during the construction of gas pipelines. The assessment of the degree of danger and the timing of external inspection and repair or replacement of defective annular welded joints largely depends on the quality of non-destructive testing, the correct identification of the types of defects and the objective determination of their geometric dimensions. To increase the reliability of the assessment of the degree of danger of the detected defects, it is necessary to use additional control methods, in particular, destructive ones. The paper presents the results of surveys and tests of metal fragments of annular welded joints of main gas pipelines containing transverse cracks of annular welded joints in order to determine the causes of the formation of these defects and to assess the degree of danger of the detected transverse cracks of the installation welds of main gas pipelines.

Keywords: main gas pipelines, cracks, annular welded joints, microstructure analysis.

V. A. Zaznobin, A. V. Nekrasov, A. V. Pankratov (LLC “Gazprom transgazNizhni Novgorod” – Engineering and Technical Center, Nizhny Novgorod, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

1. In-line technical diagnostics. Requirement for the conduct, acceptance and use of diagnostic results. (2016). Gazprom Organization Standard No. 2-2.3-1050–2016. Moscow: PAO «Gazprom». [in Russian language]
2. Ivanov M. A., Kulakov B. A., Shvetsov V. I. (2017). Cracks in castings and welds. Chelyabinsk: Izdatel'skiy tsentr YuUrGU. [in Russian language]
3. Kalinichenko N. P., Vasil'eva M. A., Radostev A. Yu. (2011). Atlas of defects in welded joints and base metal: a textbook. Tomskiy politekhnicheskiy universitet. Tomsk: Izdatel'stvo TPU. [in Russian language]
4. Welded connections. Methods for determining mechanical properties. (2006). Ru Standard No. GOST 6996–66. Moscow: Standartinform. [in Russian language]
5. Technical requirements for pipes and fittings. (2014). Gazprom Organization Standard No. 2-4.1-713–2013. Moscow: OAO «Gazprom». [in Russian language]
6. Trunk pipelines. (2013). Set of rules No. SP 3613330.2012. Moscow: Gosstroy. [in Russian language]
7. Instruction on welding technologies during the construction and repair of field and main gas pipelines. Part 1. (2007). Gazprom Organization Standard No. 2-2.2-136–2007. Moscow: OAO «Gazprom». [in Russian language]
8. Steel. Metallographic method for assessing the microstructure of sheets and strips. (1988). Ru Standard No. GOST 5640–68. Moscow: Izdatel'stvo standartov. [in Russian language]

This article  is available in electronic format (PDF).

The cost of a single article is 450 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2021.09.pp.034-041

and fill out the  form  

 

 

 
Rambler's Top100 Яндекс цитирования