10.14489/td.2021.10.pp.028-035

2021, 10 October

DOI: 10.14489/td.2021.10.pp.028-035

Obraztsov D. V., Dutov M. N., Chernyshov V. N.
ACTIVE CONTROL OF THE TOPOLOGICAL PARAMETERS OF ISLAND CATALYSTS WHEN SOLID OXIDE ELECTROLYTES OF FUEL CELLS ARE DEPOSITED ON THE SURFACE
(pp. 28-35)

Abstract. The method of active technological control of topological parameters of synthesized island catalysts on solid oxide fuel cell electrolytes is considered. The proposed method makes it possible to obtain a catalyst with a maximum active area and high adhesion to a solid oxide electrolyte, which contributes to an increase in the power of the fuel cell and an increase in the operational life. The models of two stages of formation of island films under vacuum and magnetron sputtering presented in this paper were used as a theoretical basis for the creation of a method for active technological control and control of the synthesis of island catalyst in solid oxide fuel cells. Experimental testing of the developed method has shown its efficiency and effectiveness in the creation of solid oxide fuel cells.

Keywords: island catalyst, active process control, solid oxide fuel cell, control sample, primary measuring transducer.

+ - About the Authors Click to collapse

D. V. Obraztsov, M. N. Dutov, V. N. Chernyshov (Federal State Budgetary Educational Institution of Higher Education “Tambov State Technical University”, Tambov, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Panfilov Yu. V. (2007). Vacuum thin film deposition. Tekhnologii v elektronnoy promyshlennosti, (3), pp. 76 – 80. [in Russian language]
2. Savinyh D. S., Kon'kova T. V., Liberman E. Yu. et al. (2008). Synthesis and research of catalysts for liquid-phase oxidation of organic substances, Vol. 22, 89(9), pp. 87 – 91. [in Russian language]
3. Vasil'ev V. A., Chernov P. S. (2011). Modeling the deposition process and studying the morphology of thin films. Proceedings of the International Symposium "Reliability and Quality", Vol. 1, pp. 283 – 287. Available at: https://cyberleninka.ru/article/n/modelirovanie-protsessa-osa-zhdeniya-i-issledovanie-morfologii-tonkih-plyonok [in Russian language]
4. Sidorova S. V., Yurchenko P. I. (2011). Formation of island nanostructures in vacuum. Mashinostroenie i komp'yuternye tekhnologii, 13. Available at: https://cyberleninka.ru/article/n/formirovanie-ostrovkovyh-nanostruk tur-v-vakuume [in Russian language]
5. Obraztsov D. V., Chernyshov V. N., Dutov M. N. (2020). Active control of the catalyst structure during sputtering the on surface of solid oxide electrolytes of fuel cells. Proceedings-2020 2nd International Conference on Control Systems, Mathematical Modeling, Automation and Energy Efficiency, SUMMA 2020, Vol. 2, pp. 586 – 589.
6. Obraztsov D., Chernyshov V., Dutov M. et al. (2020). Active technological control of synthesis of high-active catalysts on the surface of solid electrolytes of fuel elements. Journal of Physics: Conference Series. VI International Scientific and Practical Conference “Virtual Simulation, Prototyping and Industrial Design 2019, VSPID-2019”.

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 450 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2021.10.pp.028-035

and fill out the form