10.14489/td.2022.01.pp.004-015

2022, 01 January

DOI: 10.14489/td.2022.01.pp.004-015

Danilov V. N.
ABOUT INFLUENCE OF THICKNESS OF A LAYER OF A CONTACT LIQUID ON AMPLITUDE ECHO SIGNAL THE NORMAL PROBE WITH DIFFERENT NUMBER OF REFLECTIONS FROM A BOTTOM SURFACE
(pp. 4-15)

Abstract. With use of the analytical description of coefficient of reflection of a bottom signal from area of contact of a sample and the normal probe growing with increase of frequency of fluctuations transmitted and a registered longitudinal wave and thickness of a layer of a contact liquid, computer modeling spectra and pulses of signals of models of direct converters with frequencies 5; 7,5; 10 МГц for number of reflections from a ground surface from 1 up to 3 is carried out. It is established, that with growth of thickness of a layer of a contact liquid and frequency of the probe values of maxima of pulses of the second and third bottom signals concerning a maximum of the first bottom signal are increased. Comparison settlement for model and experimental values for the direct converter frequency 5 MHz (P111-5,0-K6-002) relative maxima of pulses of the second and third bottom signals has shown their provisional conformity for thickness of a layer of a contact liquid of 0,004 mm. The account of factor of reflection of a bottom signal from area of contact of a sample and the probe may be useful at calculation of amplitudes ground echo signals longitudinal waves for samples of metal with the purpose of increase of opportunities of correct interpretation of research by a ultrasonic method of its structure.

Keywords: bottom signal, normal probe, layer of a contact liquid, spectrum of a signal, pulse, coefficient of reflection, longitudinal wave, an impedance of a material, piezoplate, sample of metal.

+ - About the Authors Click to collapse

V. N. Danilov (JSC “RPA “CNIITMASH”, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Ushakov V. M., Evtushenko S. G., Zhukov A. D., Yurechko A. S. (2020). The non-destructive testing for aging management of equipment and pipelines at nuclear power plants. Review. Kontrol'. Diagnostika, Vol. 23, (5), pp. 6 – 18. [in Russian language]. DOI: 10.14489/td.2020.05.pp.006-018
2. Danilov V. N., Ushakov V. M. (2021). Research of structure of samples of metal of power pipelines by ultrasonic method. Kontrol'. Diagnostika, Vol. 24, (6), pp. 4 – 14. [in Russian language]. DOI: 10.14489/td.2021.06.pp.004-014
3. Ermolov I. N., Lange Yu. V. (2008). Ultrasonic testing. Non-destructive testing: handbook: in 8 volumes. Vol. 3. 2nd ed. Moscow: Mashinostroenie. [in Russian language]
4. Danilov V. N., Izofatova N. Yu. (1997). On the issue of modeling the electroacoustic path of a flaw detector with direct transducers for a cylindrical reflector. Defektoskopiya, (7), pp. 65 – 72. [in Russian language]
5. Ermolov I. N. (1981). Theory and practice of ultrasonic testing. Moscow: Mashinostroenie. [in Russian language]
6. Yamshchikov V. S., Danilov V. N., Shkuratnik V. L. (1983). Features of excitation and reception of elastic waves in a solid layer by a piston-type transducer. Defektoskopiya, (3), pp. 16 – 23. [in Russian language]
7. Danilov V. N. (2006). Program for computer simulation of the operation of electroacoustic paths of flaw detectors "Impulse +". Defektoskopiya, (3), pp. 37 – 43. [in Russian language]
8. Danilov V. N., Ushakov V. M. (2021). Investigation of the possibilities of assessing the state of the metal structure of pipelines in operation using the ultrasonic method. Defektoskopiya, (8), pp. 3 – 13. [in Russian language]
9. Danilov V. N., Voronkova L. V. (2020). Investigation of the possibilities of ultrasonic testing of cast iron with lamellar graphite using standard normal probe. Kontrol'. Diagnostika, Vol. 23, (1), pp. 4 – 18. [in Russian language]. DOI: 10.14489/td.2020.01.pp.004-018

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2022.01.pp.004-015

and fill out the form