10.14489/td.2022.06.pp.030-035

2022, 06 June

DOI: 10.14489/td.2022.06.pp.030-035

Chernov V. Yu., Magalyas N. A., Anisimov E. A., Saldayeva E. Yu.
DEVELOPMENT AND DETERMINATION OF THE MAIN PERFORMANCE INDICATORS OF THE CALIBRATION PLATE BASED ON A COMBINATION OF CONCRETE AND GLASS
(pp. 30-35)

Abstract. The work considers a surface plate, designed and manufactured from glass and reinforced concrete as a working surface and the base of the plate, respectively. The results of researching of the main metrological and operational characteristics of the plate are presented, such as surface flatness and irregularity of the working surface, the greatest surface deflection under the action of a distributed load. It has been established that the developed experimental sample of the composite plate is suitable for accuracy class 000 in terms of surface irregularity, and for other characteristics, it does not even suit for accuracy class 3. In addition, the reasons are identified and further directions for improving the design and manufacturing method are established in order to improve the metrological and operational characteristics of the composite plate

Keywords: concrete, hardness, glass, surface plate, surface deflection, surface flatness, surface irregularity.

+ - About the Authors Click to collapse

V. Yu. Chernov, N. A. Magalyas, E. A. Anisimov, E. Yu. Saldayeva (Volga State University of Technology, Yoshkar-Ola, Republic of Mari El, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Eley Metrology. Available at: https://eleymet.com/2020/02/19/the-history-of-surface-plates/ (Accessed: 20.12.2021).
2. Chernov V. Yu., Anisimov E. A., Magalyas N. A. Reversing plate. Ru Patent No. 2733972. Russian Federation. [in Russian language]
3. Magalyas N. A., Chernov V. Yu. (2019). Development of a calibration plate for equipping an educational metrological laboratory. Technical Regulation in the Common Economic Space: Collection of Articles VI All-Russian Scientific and Practical Conference with International Participation, pp. 30 – 34. Ekaterinburg: RGPPU. [in Russian language]
4. Calibration and marking plates. Specifications. (2003). Ru Standard No. GOST 10905–86. Moscow: Izdatel'stvo standartov. [in Russian language]
5. Recommendation. State system for ensuring the uniformity of measurements. Calibration and marking plates. Verification procedure. (1990). Methodical instructions No. MI 2007–89. Moscow: Izdatel'stvo standartov. [in Russian language]
6. State system for ensuring the uniformity of measurements. State verification scheme for measuring instruments for deviations from straightness and flatness. (2002). Ru Standard No. GOST 8.420–2002. Moscow: Izdatel'stvo standartov. [in Russian language]
7. Verification lines. Specifications. (2008). Ru Standard No. GOST 8026–92. Moscow: Standartinform. [in Russian language]
8. Dial gauges with a division value of 0.01 mm. Specifications. (2002). Ru Standard No. GOST 577–69. Moscow: Izdatel'stvo standartov. [in Russian language]
9. Surface roughness. Parameters and characteristics. (2018). Ru Standard No. GOST 2789–73. Moscow: Standartinform. [in Russian language]
10. Magalyas N. A., Tsoy O. V., Chernov V. Yu., Anisimov E. A. (2020). Technical solutions to reduce the cost of calibration plates. Mezhdunarodniy nauchniy elektronniy zhurnal «Sinergiya nauk», 53, pp. 581 – 585. Available at: http://synergy-journal.ru [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2022.06.pp.030-035

and fill out the form