10.14489/td.2022.06.pp.060-064

2022, 06 June

DOI: 10.14489/td.2022.06.pp.060-064

Kireev A. N., Kireeva M. A.
ANALYSIS OF THE ERRORS OF DETERMINING THE EQUIVALENT SIZE AND ORIENTATION OF A PLANE DEFECT UNDER MANUAL ULTRASONIC CONTROL
(pp. 60-64)

Abstract. The article reviews and analyzes the method of defect identification for determining the angle of inclination of a planar point defect to the input surface of an ultrasonic wave and its equivalent size during manual ultrasonic testing by the echo-pulse method. The method is most widely used in ultrasonic control of parts obtained by plastic deformation (forging, hot and cold stamping, rolling). This is due to the fact that defects in such parts are predominantly planar in nature. The method of ultrasonic defect identification is based on the use of a combined transducer P131-2.5-0i18-VO-04 containing two piezoelectric transducers in one housing with a normal input of a longitudinal ultrasonic wave and an input angle of 18º. The article presents a mathematical apparatus for the implementation of this method. Also presented is a software product that allows you to automate calculations when using this method of defect identification. The article carried out experimental studies of this method of ultrasonic defect identification, which showed its low error and high efficiency. The average value of the relative error in determining the angle of inclination of a planar point defect to the input surface of an ultrasonic wave was 1.525 %. The average value of the relative error in determining the equivalent size of a planar point defect located at an angle to the ultrasonic wave input surface was 1.192 %.

Keywords: nondestructive control, acoustic control, ultrasonic control, echo-pulse method, defect identification, piezoelectric transducer, combined transducer, defect.

+ - About the Authors Click to collapse

A. N. Kireev, M. A. Kireeva (Lugansk State University named after Vladimir Dahl, Lugansk, LPR) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Sudarikova E. V. (2007). Non-destructive testing in production: textbook. Part 1. Saint Petersburg: GUAP. [in Russian language]
2. Klyuev V. V. (Ed.) (2003). Non-destructive testing and diagnostics: a handbook. 2nd ed. Moscow: Mashinostroenie. [in Russian language]
3. Klyuev V. V. (Ed.), Aleshin N. P., Bobrov V. T., Lange Yu. V. et al. (2011). Ultrasonic control: textbook. Moscow: ID «Spektr». [in Russian language]
4. Kireev A. N. (2016). Defectometry at ultrasonic diagnostics of elements and systems of rolling stock of railways. Lugansk: Noulidzh. [in Russian language]
5. Kireev A. N. (2016). Diagnosis of steel forgings by ultrasonic echo method. Zavodskaya laboratoriya. Diagnostika materialov, Vol. 82, (12), pp. 27 – 30. [in Russian language]
6. Kireev A. N. (2015). Method for Determining the Equivalent Size of a Discontinuity in Ultrasonic Diagnosis of Elements and Systems of Railway Rolling Stock. Vestnik Rostovskogo gosudarstvennogo universiteta putey soobshcheniya, 60(4), pp. 14 – 21. [in Russian language]
7. Babadzhanov L. S., Babadzhanova M. L. (2007). Measures and samples in the field of non-destructive testing. Moscow: Standartinform. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2022.06.pp.060-064

and fill out the form