Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 12 | 2024
2023, 03 March

DOI: 10.14489/td.2023.03.pp.004-013

Danilov V. N.
ABOUT SOME POSSIBILITIES OF INCREASING THE SENSITIVITY OF AN ANGLE PROBE USING A MATCHING LAYER BETWEEN A PIEZOPLATE AND A PRISM
(pp. 4-13)

Abstract. Based on computer modeling, the possibility of increasing the sensitivity of an angle probe when using a quarter-wave matching layer between a prism and a piezoplate with an optimal characteristic impedance of epoxy resin and phenoplast with tungsten filler and textolite is shown and quantitative estimates of such an increase are given in comparison with the case of the absence of a matching layer. The evaluation of the possibilities of using a quarter-wave metal matching layer made of magnesium and aluminum (for the nominal frequency of the 2.5 MHz probe) to increase the sensitivity was carried out. In the case of such an aluminum layer, the signal spectrum has two local maxima due to the relatively large layer impedance compared to the optimal value, which leads to distortion of the pulse shape and affects its duration. The presence of two spectrum maxima is due to the fact that the piezoplate and the matching layer are two coupled oscillatory systems with a coupling coefficient exceeding the value of the inverse acoustic Q-factor of the matching layer, decreasing with increasing its characteristic impedance.

Keywords: angle probe, piezoplate, echo signal, frequency spectrum, pulse, matching layer, damper, characteristic impedance, acoustic Q-factor.

V. N. Danilov (JSC “RPA “CNIITMASH”, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

1. Ermolov I. N., Lange Yu. V. (2006). Nondestructive Testing: Handbook: in 8 volumes. Vol. 3. Ultrasonic testing. Moscow: Mashinostroenie. [in Russian language]
2. Ermolov I. N. (1992). Inspection with ultrasound: a brief handbook. Moscow: NPO TsNIITMASh. [in Russian language]
3. Korolev M. V., Karpel'son A. E. (1982). Wideband ultrasonic transducers. Moscow: Mashinostroenie. [in Russian language]
4. Ermolov I. N., Gitis M. B., Korolev M. V. et al. (1986). Ultrasonic transducers for nondestructive testing. Moscow: Mashinostroenie. [in Russian language]
5. Danilov V. N. (2008). On the use of quarter-wave matching protectors in direct converters. Defektoskopiya, (5), pp. 66 – 78. [in Russian language]
6. Danilov V. N., Voronkov V. A., Izofatova N. Yu. (1996). Investigation of the amplitude-frequency response of the acoustic path of the radiating direct converter. Defektoskopiya, (3), pp. 37 – 45. [in Russian language]
7. Danilov V. N. (2006). Program for computer simulation of the electroacoustic paths of flaw detectors "IMPULS+". Defektoskopiya, (3), pp. 37 – 43. [in Russian language]
8. Danilov V. N. (2021). About features of characteristics of a signal of the angle beam probe with composite piezoplate and various types piezoelectric ceramics. Kontrol'. Diagnostika, (2), pp. 6 – 16. [in Russian language] DOI: 10.14489/td.2021.02.pp.006-016
9. Ermolov I. N., Vopilkin A. H., Badalyan V. G. (2000). Calculations in ultrasonic flaw detection: a brief handbook. Moscow: NPTs NK «EKHO+». [in Russian language]
10. Ermolov I. N. (1981). Theory and practice of ultrasonic testing. Moscow: Mashinostroenie. [in Russian language]

This article  is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2023.03.pp.004-013

and fill out the  form  

 

 

 
Rambler's Top100 Яндекс цитирования