Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 12 | 2024
2023, 04 April

DOI: 10.14489/td.2023.04.pp.038-047

Gogolinskii K. V., Alekhnovich V. V., Ivkin A. E., Umanskii A. S., Solomenchuk P. V.
STUDY OF METHODS OF INCOMING INSPECTION OF METAL COATINGS OF SHUT-OFF VALVES OF PIPELINES
(pp. 38-47)

Abstract. The article describes methods and tools for inspection of thickness and hardness of coatings of elements of ball shut-off valves (ball plugs), which are one of the main elements of main pipelines and distribution networks. Properties of nickel-phosphorus (ENP) coatings most frequently used to protect ball plugs from corrosion and abrasion are analyzed. Various methods and means of control are considered. In the process of experimental studies, the thickness of coatings was measured by magnetic induction and eddy current methods of nondestructive control, as well as by ball abrasion method. Hardness values were measured by microvickers and ultrasonic contact impedance methods. The main sources of measurement errors were identified. Conclusions are drawn for each of the methods used in the incoming inspection of coatings.

Keywords: ball shut-off valves, nickel-phosphorus coating, thickness gauging, hardness gauging.

K. V. Gogolinskii, V. V. Alekhnovich, A. E. Ivkin, A. S. Umanskii (Saint Petersburg Mining University, St. Petersburg, Russia) Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
P. V. Solomenchuk (LLC “CONSTANTA”, St. Petersburg, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

1. Lyubchik A. N., Krapivskiy E. I., Bol'shunova O. M. (2011). Forecasting the technical condition of trunk pipelines Pipelines based on analysis of emergency situations. Zapiski Gornogo instituta, Vol. 192, pp. 153 – 156. Available at: https://pmi.spmi.ru/index.php/pmi/article/view/6341 [in Russian language]
2. Dzhemilev E. R., Shammazov I. A., Sidorkin D. I. et al. (2022). Development of technology and devices for repair of trunk pipelines with cutting out their defective sections. Neftyanoe hozyaystvo, (10), pp. 78 – 82. [in Russian language] DOI: 10.24887/0028-2448-2022-10-78-82. EDN KCHEOH.
3. Yamilev M. Z., Pshenin V. V., Matveev D. S. et al. (2022). Use of compact inspection devices to monitor the technical condition of pipelines in protective casings. Neftyanoe hozyaystvo, (2), pp. 106 – 111. [in Russian language] DOI: 10.24887/0028-2448-2022-2-106-110. EDN WKUHPY.
4. Krizskiy V. N., Viktorov S. V., Luntovskaya Ya. A. (2022). Transient resistance modeling of trunk pipeline insulation based on magnetic induction modulus measurements. Matematicheskoe modelirovanie, Vol. 34 (9), pp. 107 – 122. [in Russian language] DOI: 10.20948/mm-2022-09-07. – EDN PWWRKI.
5. Pshenin V. V., Dzhemilev E. R., Rozanova L. R., Komarovskiy M. S. (2022). Results of the analysis of accident rates of gas distribution systems. Problemy sbora, podgotovki i transporta nefti i nefteproduktov, 138(4), pp. 89 – 101. [in Russian language] DOI: 10.17122/ntj-oil-2022-4-89-101. EDN VUIACC.
6. Vasin S. A., Plahotnikova E. V. (2018). Methodology for calculating the torque value of electric actuator setting in the system of electric actuated shut-off valves with rectilinear movement of the shut-off valve. Zapiski Gornogo instituta, Vol. 232, pp. 407 – 412. Available at: https://doi.org/10.31897/pmi.2018.4.407 [in Russian language]
7. Dong V. H. (2013). Ball valves for gas pipelines. New technologies to the oil and gas region: materials of the All-Russian scientific-practical conference of students, postgraduates and young scientists, dedicated to the 50th anniversary of TII-TymGNGU, pp. 357 – 359. Tyumen': Tyumenskiy gosudarstvenniy neftegazoviy universitet. [in Russian language] EDN TCPWLZ.
8. Piksaykin R. V., Stepanenko O. A. (2012). Control of gas and liquid leakage in ball valves of main pipelines. Svarka i diagnostika, (3), pp. 51–52. [in Russian language] EDN OZJBFF.
9. Types and purpose of stop valves: electronic resource. Available at: https://pkfdetal.ru/info/11-vidy-i-naznachenie-zapo-rnoj-armatury (Accessed: 02.07.2022). [in Russian language]
10. Chemaa K., Kezrane M., Hassani S., et al. (2022). Austenite Stainless Steel Multilayers Coatings on Ball Valves for Tribological Behavior Improvement. Applied Physics A, Vol. 128 (7). Available at: https://doi.org/10.1007/s00339-022-05770-z [in Russian language]
11. Unified technical requirements for the supply of ball valves: guidelines. (2019). Methodological guidelines No. MU.10.36. Irkutsk: OOO «Irkutskaya neftyanaya kompaniya». [in Russian language]
12. Pipeline valves. Special ball valves. General specifications. PJSC Gazprom; Research Institute of Natural Gases and Gas Technologies - Gazprom VNIIGAZ, etc. (2018). Standard of the organization No. STO Gazprom 2-4.1-1108–2017. Saint-Petersburg: Gazprom ekspo. [in Russian language]
13. Singh D. D. N., Ghosh R. (2006). Electroless nickelphosphorus coatings to protect steel reinforcement bars from chloride induced corrosion. Surface and Coatings Technology, Vol. 201 (1–2), pp. 90 – 101. Available at: https://doi.org/10.1016/j.surfcoat.2005.10.045
14. Gamburg Yu. D. (2020). Chemical nickel plating (obtaining nickel-phosphorus coatings by electrocatalytic reduction with hypophosphite). Moscow: RAN. [in Russian language]
15. Potapov A. I., Syas'ko V. A. (2009). Non-destructive methods and means of thickness control of coatings and products: a scientific, methodological, reference manual. Saint-Petersburg: Gumanistika. [in Russian language]
16. Syas'ko V. A. (2011). Methods and instruments for measuring the thickness of galvanic coatings. Issues of application and ensuring the reliability of measurement results. Gal'vanotekhnika i obrabotka poverhnosti, Vol. 19 (3), pp. 42 – 52. [in Russian language]
17. Kostin V. N., Smorodinskiy Ya. G. (2017). Multipurpose hardware and software systems of active electromagnetic control as a trend. Defektoskopiya, (7), pp. 23 – 34. [in Russian language]
18. Syas'ko V. A. (2016). Measuring the thickness of sprayed nickel coatings on large cast iron products. Zapiski Gornogo instituta, Vol. 221, pp. 712 – 716. Available at: https://doi.org/10.18454/pmi.2016.5.712 [in Russian language]
19. Syas'ko V. A., Golubev S. S., Smorodinskiy Ya. G. et al. (2018). Measurement of electromagnetic parameters of thickness measures of metal coatings. Defektoskopiya, (10), pp. 25 – 36. [in Russian language] DOI: 10.1134/S0130308218100044
20. Salmi M., Magrini A., Gigante G. E., Barra O. A. (1978). Coating Thickness Measurement by Means of the Radioisotope X-Ray Fluorescence Technique. Isotopenpraxis. Isotopes in Environmental and Health Studies, Vol. 14 (11), pp. 380 – 381. DOI: 10.1080/10256017808544250
21. Mashin N. I., Leont'eva A. A., Tumanova A. N., Ershov A. A. (2011). X-ray fluorescence method for determining the thickness of aluminum coating on steel. Zhurnal prikladnoy spektroskopii, Vol. 78 (3), pp. 454 – 459. [in Russian language] EDN NQXVER.
22. Syas'ko V. A., Vasil'ev A. Yu. (2021). Pulse magnetic thickness control of metal coatings. Defektoskopiya, (9), pp. 63 – 70. [in Russian language] DOI: 10.31857/S0130308221090074
23. Ignatova Yu. A., Eritenko A. N., Revenko A. G., Tsvetyanskiy A. L. (2011). X-ray Fluorescence Analysis of Solid State Films and Coatings. Analitika i kontrol', Vol. 15 (2), pp. 126 – 140. [in Russian language] EDN NUCXSN.
24. Kazantsev V. V., Medvedevskih S. V., Vasil'ev A. S. (2018). State primary reference units of surface density and mass fraction of elements in coatings GET 168-2015. Izmeritel'naya tekhnika, (9), pp. 17 – 19. [in Russian language] DOI: 10.32446/0368-1025it-2018-9-17-19. EDN YLFNUL.
25. Gogolinskiy K. V., Ivkin A. E., Alekhnovich V. V. et al. (2020). Evaluation of accuracy indicators for determining the thickness of coatings by ball abrasion method. Zavodskaya laboratoriya. Diagnostika materialov, Vol. 86 (7), pp. 39 – 44. [in Russian language] DOI: doi.org/10.26896/1028-6861-2020-86-7-39-44
26. Gogolinskii K., Syasko V., Umanskii A. et al. (2019). Mechanical properties measurements with portable hardness testers: advantages, limitations prospects. Journal of Physics: Conference Series, Vol. 1384.
27. Gogolinskiy K. V., Syas'ko V. A. (2014). Metrological support for dynamic hardness measurement methods in the Russian Federation: existing problems and ways to solve them. V mire nerazrushayushchego kontrolya, 63(1), pp. 69 – 75. [in Russian language] EDN RYXGSV.
28. Useinov A., Gogolinskiy K. (2010). Mechanical properties of ultrafine carbon diamond-like coatings. Nanoindustriya, (5), pp. 54 – 57. [in Russian language] EDN OBQUFD.
29. Ovchinnikov E. V., Chekan N. M., Eysymont E. I. et al. (2019). High-temperature corrosion-resistant plasma-chemical coatings for tooling. Vestnik Grodnenskogo gosudarstvennogo universiteta imeni Yanki Kupaly, Seriya: 6. Tekhnika, Vol. 9, (1), pp. 6 – 17. [in Russian language] EDN PPTBRH.
30. Ashirova A. D., Gogolinskiy K. V., Nikazov A. A. (2020). Possibilities of application of portable hardness meters for nondestructive control of mechanical properties of coatings. XXII All-Russian Conference on Non-Destructive Testing and Technical Diagnostics proceedings, pp. 181 – 184. Moscow: Izdatel'skiy dom «Spektr». [in Russian language]
31. Syasko V., Solomenchuk P., Ivkin A., Vasilev A. (2021). Thickness Inspection of Magnetic Nickel Coatings on Ball Valve Mechanisms. BINDT NDT 2021 Webinar Week [2A5]. Thickness Inspection of Magnetic Nickel Coatings on Ball Valve Mechanisms (bindt.org). Telford.

This article  is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2023.04.pp.038-047

and fill out the  form  

 

 

 
Rambler's Top100 Яндекс цитирования