10.14489/td.2023.05.pp.034-041

2023, 05 May

DOI: 10.14489/td.2023.05.pp.034-041

Irzaev G. Kh.
PROVISION AND EVALUATION OF TESTABILITY OF THE DESIGN OF COMPLEX RADIO-ELECTRONIC MEANSDEVICES AT THE STAGES OF THEIR DESIGN
(pp. 34-41)

Abstract. The influence of modern X-ray and electrical methods for monitoring and diagnosing complex radio-electronic means on their design and layout solutions is considered. The most significant design principles for the design of traceable electronic products are formulated in the form of qualitative recommendations on the structural continuity of the components, the effective location of control points, ensuring the accessibility of the structure to unhindered measurements, and the creation of technological control and diagnostic maps. A system of particular indicators of the controllability of the design of the components of radio electronic means has been developed, which determine the convenience of monitoring and diagnosing their technical condition and making decisions to improve the operational manufacturability. Using the example of evaluating the testability of the designed device for operational monitoring of the state of on-board equipment of aircraft, it is shown that the proposed system of indicators made it possible to quantify the design decisions made by the designer, which influenced the increase in this indicator for the designed product compared to its analogue.

Keywords: incircuit testing, testability, control point, design ease of removal, printed circuit assembly, testability indicators, radio-electronic means, design stage.

+ - About the Authors Click to collapse

G. Kh. Irzaev (Daghestan State Technical University, Makhachkala, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Irzaev G. H. (2008). System of expert analysis of electronic devices manufacturability. Izvestiya vysshih uchebnyh zavedeniy. Priborostroenie, Vol. 51 (3), pp. 66 – 71. [in Russian language]
2. Sharikov S. V. (2000). Construction of testability of complex radio engineering systems and assessment of the level of their adaptability to the determination of technical condition. Moscow. [in Russian language]
3. Ivanov I. A. (2011). Method of computer-aided design of testable electronic devices. Moscow. [in Russian language]
4. Technical diagnostics. Testability. General requirements. (2009). Ru Standard No. GOST 26656–85. Moscow: Standartinform. [in Russian language]
5. Ivanov I. A., Uvaysov R. I., Uvaysov S. U. (2011). Ensuring testability of radioelectronic means within the framework of CALS-technologies. Kachestvo. Innovatsii. Obrazovanie, (1), pp. 43 – 46. [in Russian language]
6. Uvaysov S. U., Ivanov I. A., Zhurkov A. P., Koshelev N. A. (2013). Analysis of the state of the problem of ensuring testability of radioelectronic means at the design stage. Vestnik Surgutskogo gosudarstvennogo universiteta, 2(2), pp. 39 – 41. [in Russian language]
7. Vantsov S. V., Halyavina A. A. (2017). Complex electronic devices: the ability to automate diagnostics. Avtomatizatsiya. Sovremennye tekhnologii, Vol. 71 (12), pp. 531 – 537. [in Russian language]
8. Incircuit inspection of printed circuits and electronic units: A-Contract website. Available at: https://a-contract.ru/produkcija/kachestvo-produkcii-a-kontrakt/vnutriskhem-nyi-kontrol (Accessed: 11.12.2022). [in Russian language]
9. Gorodetskiy A., Kurilan L. (2010). Introduction to incircuit testing. Proizvodstvo elektroniki: tekhnologii, oborudovanie, materialy, (2), pp. 67 – 71. [in Russian language]
10. Ivanov A. (2020). Current state of support for peripheral scanning by the domestic electronic component base. Elektronika: nauka, tekhnologiya, biznes, 197(6), pp. 76 – 79. [in Russian language]
11. Vikulova E. N. (2003). Synthesis of controllable systems according to the information criterion. Nizhniy Novgorod. [in Russian language]
12. Ivanov I. A. (2010). Ensuring Completeness of Control Requirements in Electronic Design. Reliability and Quality: Proceedings of the International Symposium. Vol. 2, pp. 30 – 31. Penza: Izdatel'stvo PGU. [in Russian language]
13. Popov Yu. V., Spiridonov I. B., Frolkov A. I. et al. (2019). Problem solving on airworthiness of an aircraft. Nauchniy vestnik GosNII GA, 28, pp. 20 – 29. [in Russian language]
14. Uil'yams T. U., Parker K. P. (1983). Design of controllable devices. Proceedings of the Institute of Electrical and Electronics Engineers, Vol. 71 (1), pp. 122 – 137. [in Russian language]
15. Irzaev G. H. (2010). Expert methods for managing the manufacturability of industrial products. Moscow: Infra-Inzheneriya. [in Russian language]

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2023.05.pp.034-041

and fill out the form