10.14489/td.2023.07.pp.058-064

2023, 07 July

DOI: 10.14489/td.2023.07.pp.058-064

Bondarenkо P. N., Lavrov A. А., Lupin A. V., Potysev S. A., Khafizov D. I., Yusupova D. R.
DEVELOPMENT OF AN AUTOMATED SYSTEM FOR INPUT TESTING AND DIAGNOSTICS OF CU/TI RODS
(pp. 58-64)

Abstract. The article presents the results of the development and testing of an automatic installation designed to diagnose (classify) defects of Cu/Ti rods (electrodes) widely used as current conductors in electroplating and chemical production. It is shown that the introduction of such an installation using one of the methods of non-destructive testing allows, on average, to reduce the diagnostic time by an order of magnitude compared to the option if the necessary actions were performed manually. To create an automated system based on the installation, modern electromechanical, electronic and computing tools have been used, which allow almost completely automating the diagnostic process from taking the necessary measurements, filtering data, displaying them in the form of graphs and tables, as well as classifying defects at the last stage using a neural network. According to the tests carried out, it was shown that the classification accuracy was at least 93 %.

Keywords: Cu/Ti rods (electrodes), rotary swaging, testing, defect diagnostics, neural networks.

+ - About the Authors Click to collapse

P. N. Bondarenkо, A. А. Lavrov, A. V. Lupin (Peter the Great St. Petersburg Polytechnic University) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
S. A. Potysev («IT-Resource», Ltd. Saint-Petersburg, Russia) Е-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
D. I. Khafizov (JSC «STC UPS», Saint-Petersburg, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
D. R. Yusupova (Peter the Great St. Petersburg Polytechnic University, Saint-Petersburg, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Malahov A. Yu., Saykov I. V., Nikolaenko P. A., Pervuhin L. B. (2016). Investigation of the influence of the continuity of the connection on the operational properties of the copper-titanium conductor. Vestnik Tambovskogo universiteta. Seriya: Estestvennye i tekhnicheskie nauki. Fizika, Vol. 21 (3), pp. 1136 – 1138. [in Russian language]
2. Pas'ko A. N., Tkach O. A. (2009). Features of the process of rotational forging of a cylindrical billet without a mandrel. Izvestiya Tul'skogo gosudarstvennogo universiteta. Tekhnicheskie nauki, (3), pp. 141 – 145. [in Russian language]
3. Liu X., Zou W., Fu H., Xie J. (2017). Cu/Ti Bimetal Composite Pipe Fabricated by Heating Rotary Swaging Forming and Its Interface, Microstructure and Properties. Chinese Journal of Rare Metals, (4), pp. 364 – 370 (in Chinese). DOI: 10.13373/j.cnki.cjrm.XY16110005
4. Malahov A. Yu. (2019). Explosion cladding of long cylindrical products with functional coatings. Chernogolovka: Institut strukturnoy makrokinetiki i problem materialovedeniya im. A. G. Merzhanova RAN. [in Russian language]
5. OOO «IT-Resurs». Available at: http://progresstamp.ru// (Accessed: 23.10.2022). [in Russian language]
6. Hafizov D. I., Dautov A. A. (2020). Development of a control program for an installation for diagnosing copper-titanium rods. SPbPU Science Week: Proceedings of a scientific conference with international participation. Energy Institute, pp. 30 – 32. Saint Petersburg: Izdatel'stvo Politekh-nicheskogo universiteta. [in Russian language]
7. Klyuev V. V. (Ed.), Vavilov V.P., Podmaster'ev K.V., Sosnin F.R. et al. (2006). Non-destructive testing and diagnostics: reference book: in 8 volumes. Vol. 5. Book 2. Electric control. 2nd ed. Moscow: Mashinostroenie. [in Russian language]
8. Kalambet Yu. A., Koz'min Yu. P., Samohin A. C. (2017). Noise filtering. Comparative analysis of methods. Analitika, 36(5), pp. 88 – 101. [in Russian language]. DOI: 10.22184/2227-572X.2017.36.5.88.101
9. Keras API reference. Available at: https://keras.io/api/ (Accessed: 23.10.2022).
10. NumPy Reference, Release 1.23.0. Available at: https://numpy.org/doc/1.23/numpy-ref.pdf (Accessed: 23.10.2022).
11. Scikit-learn library. Available at: https://scikit-learn.org/stable/getting_started.html (Accessed: 23.10.2022).

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2023.07.pp.058-064

and fill out the form