Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 12 | 2024
2023, 10 October

DOI: 10.14489/td.2023.10.pp.012-021

Danilov V. N., Ushakov V. M.
ESTIMATION OF THE AMPLITUDES OF ECHO SIGNALS OF LONGITUDINAL WAVES RECEIVED BY NORMAL AND ANGLE PROBES IN THE TANDEM TECHNIQUE WITH THE TRANSFORMATION OF RADIATED TRANSVERSE WAVES ON AN INFINITE VERTICALLY ORIENTED CRACK
(pp. 12-21)

Abstract. The results of the calculation of the acoustic channel of the tandem technique with wave transformation with the use of normal and angle probes for the registration of longitudinal waves are presented. Formulas are obtained for calculating the amplitudes of echo signals during the transformation of transverse waves on the reflector in the form of a vertically oriented crack of the “stripe” type. The amplitudes of echo signals are compared when using normal and angle receiving probes, on the basis of which recommendations are given for choosing a scheme for sounding welded joints for the tandem technique with wave transformation on reflectors of the discontinuity type. It is shown that the maximum of the signal when registering a transformed longitudinal wave with a normal probe is significantly greater than such a maximum when registering it with an angle probe for depth values up to about 0.5 of the thickness of the test object.

Keywords: tandem technique, acoustic channel, control, probe, longitudinal wave, transverse wave, wave transformation, planar defect, vertically oriented crack.

V. N. Danilov, V. M. Ushakov (JSC “RPA “CNIITMASH”, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

1. Shcherbinskiy V. G. (2005). Technology of ultrasonic testing of welded joints. Moscow: Tisso. [in Russian language]
2. Shcherbinskiy V. G., Beliy V. E. (1974). Detection of weld defects during ultrasonic testing using the tandem system. Defektoskopiya, (5), 23 – 29. [in Russian language]
3. Grebennikov V. V., Lebedev N. E. (1979). Echomirror method of ultrasonic testing with transformation of elastic waves. Defektoskopiya, (10), 73 – 78. [in Russian language]
4. Klyuev V. V. (Ed.), Ermolov I. N., Lange Yu. V. (2006). Non-destructive testing: handbook: in 8 volumes. Vol. 3. Ultrasonic testing. 2nd ed. Moscow: Mashinostroenie. [in Russian language]
5. Ushakov V. M., Shcherbinskiy V. G., Vopilkin A. H. (1983). Reflection and transformation of linearly polarized shear waves on defects. Defektoskopiya, (9), 17 – 23. [in Russian language]
6. Danilov V. N. (2022). Calculations of acoustic сhannels of tandem techniques with usage of transverse waves and tandem with transformation of transverse waves in longitudinal on the upright oriented planar reflector such as a flat bottom hole. Kontrol'. Diagnostika, 25(6), 4 – 17. [in Russian language] DOI: 10.14489/td.2022.06.pp.004-017
7. Danilov V. N. (2021). Calculations of acoustic paths of inclined transducers in ultrasonic flaw detection. Moscow: Izdatel'skiy dom «Spektr».
8. Danilov V. N. (2020). About some features of application of a tandem technique in the ultrasonic testing. Kontrol'. Diagnostika, 23(8), 4 – 16. [in Russian language] DOI: 10.14489/td.2020.08.pp.004-016
9. Danilov V. N. (2010). Towards the calculation of the transformation characteristics of transverse and longitudinal waves on reflectors with flat surfaces. Defektoskopiya, (9), 50 – 63. [in Russian language]
10. Danilov V. N. (2010). To the calculation of DGS diagrams of an inclined transducer. Defektoskopiya, (5), 45 – 65. [in Russian language]

This article  is available in electronic format (PDF).

The cost of a single article is 500 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2023.10.pp.012-021

and fill out the  form  

 

 

 
Rambler's Top100 Яндекс цитирования