10.14489/td.2015.05.pp.051-053

2015, 05 May

DOI: 10.14489/td.2015.05.pp.051-053

Yurkevich V.V., Mitropolski A.A.
ADAPTED CONTROL OF GEOMETRICAL PARAMETERS
(pp. 51-53)

Abstract. This paper deals with a new method for measuring the trajectories of formation for adapted control of geometrical parameters of ma-chine tools. The new method of measuring paths of workpiece axis during turning is used in studies. It is applicatedtriangulation laser sensors which receive the data to calculate the geometric surface of the image format processed 3D, accuracy indicators in transverse and longitudinal cross sections of the treated surface. The system operates in a mode <<online>> whichallows to getdata on the trajectories of morphogenesis anytime. The advantage of triangulation laser sensors in comparison with eddy current is that the interaction of the laser beam occurs at the reflective surface area of about 4 mm2, while the eddy current sensor has a sensing tip diameter equal to 16 mm, representing an area of approximately 50 mm2, and hence signal isaveraged over an area more than 12 times.

Keywords: trajectory shaping, customized control.

+ - About the Authors Click to collapse

V. V. Yurkevich
Federal State Budget Educational Institution of Higher Professional Education “Moscow State University of Technology “STANKIN”, Moscow, Russia. E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

A. A. Mitropolski
Ltd. Radiolayn, Moscow, Russia

+ - References Click to collapse

1. Grigor'ev S. N., Gurin V. D., Kozochkin M. P. et al. (2011). Diagnostics of automated production. Moscow: Mashinostroenie.
2. Grigor'ev S. N., Kozochkin M. P., Sabirov F. S., Sinopal'nikov V. A. (2010). The problems of technical diag-nostics of machining equipment at the present stage of de-velopment. Vestnik MGTU «Stankin», (4), pp. 27-36.
3. Kozochkin M. P., Sabirov F. S. (2008). Operational diagnostics in the metal processing - problems and challeng-es. Vestnik MGTU «Stankin», (3), pp. 14-18.
4. Iurkevich V. V. (2011). Universal intellectual diag-nostic complex for lathe testing. Kontrol'. Diagnostika, (9), pp. 53-57.
5. Iurkevich V. V. (2001). The system of forecasting of lathes precision. Vestnik mashinostroeniia, (8), pp. 44-48.

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below: