Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 11 | 2024
2015, 06 June

DOI: 10.14489/td.2015.06.pp.044-048

 

Shuldeshov E. M., Lepeshkin V. V., Romanov A. M.
METHOD OF NONDESTRUCTIVE TEST OF REFLECTION COEFFICIENT OF RADIO ABSORBING POLYMERIC COMPOSITE MATERIALS
(pp. 44-48)

Abstract. This article is devoted to the research of reflection coefficient of radio absorbing polymeric composite materials (PKM) by non-destructive method. Measurements are carried out in free space and allow to carry out assessment of reflection coefficient of materials of radio engineering assignment with averaging the values on antenna aperture area, in dozens times exceeding sizes of samples in wave guides and also allows to carry out non-destructive testing directly products. Features of measurement of reflection coefficient of samples are described. The description of ambiguity of the concept “reflection coefficient” is given. The stand for monitoring procedure of reflection coefficient of materials of radio engineering assignment by non-destructive method is described. The standard sizes of samples, sufficient for reflection coefficient measurements with the different frequency ranges are described. The practical error of measurements is evaluated. Advantages of this method are described, cases of the most reasonable application are considered.

Keywords: radio absorbing material, reflection coefficient, material of radio engineering assignment, non-destructive testing.

 

E. M. Shuldeshov, V. V. Lepeshkin, A. M. Romanov
Federal State Unitary Enterprise All-Russian Scientific Research Institute of Aviation Materials, Moscow, Russia. E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

 

 

1. Brandt A. A. (1963). Studies of dielectrics at ultra-high frequencies. (pp. 191-201). Moscow: Gosudarstvennoe izdatel'stvo fiziko-matematicheskoi literatury.
2. Beliaev A. A., Kondrashov S. V., Lepeshkin V. V., Romanov A. M. (2012). Radio-absorbing materials. Aviatsionnye materialy i tekhnologii, (S), pp. 348-352.
3. Beliaev A. A., Agafonova A. S., Antipova E. A., Botanogova E. D. (2013). Structural radio-absorbing material of three-layer structure with matching layer. Trudy VIAM, (7), Article No. 2.
4. Iurkov G. Iu., Kraev I. D., Obraztsova E. P. (2014). The influence of the morphology of the magnetic filler on the radio-absorbing characteristics of composite materials. Aviatsionnye materialy i tekhnologii, (S2), pp. 10-14.
5. Kablov E. N. (2012). Strategic directions of devel-opment of materials and technologies of their processing for the period until 2030. Aviatsionnye materialy i tekhnologii, (S), pp. 7-17.
6. Kablov E. N. (2008). Aerospace materials sci-ence. Vse materialy. Entsiklopedicheskii spravochnik, (3), pp. 2-14.
7. Kablov E. N. (2001). The quality control of materi-als is a guarantee of the safe operation of aircraft. Aviatsionnye materialy i tekhnologii, (1), pp. 3-8.
8. Murashov V. V. (2012). Determination of physico-mechanical properties and structure of polymer composites using acoustic methods. Aviatsionnye materialy i tekhnologii, (S), pp. 465-474.
9. Murashov V. V., Rumiantsev A. F. (2007). Defects of monolithic parts and multilayer structures made of poly-mer composite materials and detection methods. Part 2. Methods of defects detection of monolithic parts and multi-layer structures made of polymer materials. Kontrol'. Diagnostika, (5), pp. 31,36,41,42.
10. Murashov V. V., Rumiantsev A. F. (2007). Diag-nostics of polymer composites using acoustic methods. Aviatsionnye materialy. 75 years. Selected papers of VIAM 1932–2007: jubilee scientific-technical collection of articles. Moscow: VIAM, pp. 342-347.
11. Murashov V. V., Rumiantsev A. F., Ivanova G. A., Faizrakhmanov N. G. (2008). Diagnostics of the structure, composition and properties of polymeric composite materi-als. Aviatsionnye materialy i tekhnologii, (1), pp. 17-24.
12. Murashov V. V., Rumiantsev A. F. (2008). Determi-nation of the porosity of the fiber using laser-acoustic meth-od in aircraft structures. International scientific and tech-nical conferences «Gidroaviasalon –2008». Part 1. Moscow: TsAGI, pp. 287-291.
13. Murashov V. V., Rumiantsev A. F. (2008). Diagnos-tics of structure and properties of polymeric composites in parts and structures. Kontrol'. Diagnostika, (8), pp. 13-17.
14. Sorokin K. V., Murashov V. V., Fedotov M. Iu., Goncharov V. A. (2011). Forecasting the development of defects in structures from PCM using method of identifcation changes in stiffness when the material is actuated. Aviatsionnye materialy i tekhnologii, (2), pp. 20-22.
15. Murashov V. V. (2013). Non-destructive testing of workpieces and parts made of carbon-carbon composite material for reusable spacecraft «Buran». Trudy VIAM, (4), Article No. 06.
16. Shul'deshov E. M., Lepeshkin V. V., Romanov A. M. (2014). Method of nondestructive testing of complex dielectric permittivity of the input poorly filled gradient layers radio-absorbing polymer composites. Trudy VIAM, (10), Article No. 11.

 

 

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article


Type the characters you see in the picture below



 

 

 
Rambler's Top100 Яндекс цитирования