Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная Current Issue
28 | 03 | 2024
2019, 04 April

DOI: 10.14489/td.2019.04.pp.030-035

 

Zhukov A. D.
PROBLEM STATEMENT FOR DETECTION AND IDENTIFICATION OF COMBINED DEFECTS DURING THE INLINE INSPECTION OF OIL-PIPELINES BY HIGH-RESOLUTION ACOUSTIC INLINE INSPECTION TOOLS
(pp. 30-35)

Abstract. An observation and problem statement for a detection and an identification of combined defects by ultrasonic inline-inspection tools (ILI-tools) according to the regulations for the purpose of an oil pipeline technical condition assessment is considered. For utilizing regulated reference notch reflectors (right-angled) at the calibration blocks it is necessary to provide an additional study to specify a process of the echopulse generation for the detection and identification of considered combined defects. The model of the notch – like reflector has been presented for a scattering imitation of an elastic wave which were reflected by a surface of the combined defects. This model is a notch – like corner reflector with components as a flat and curved convex planes. Singularity of an echo signal generation has been assessed for the proposed corner reflector next to the regulated by codes reflector. Sufficient difference of echo-signal from standardized notch – reflector and proposed model for imitation of combined defects has been confirmed experimentally.

Keywords: oil-pipeline, inline-inspection tool, combined defect.

 

 A. D. Zhukov (Bauman Moscow State Technical University, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

 

 

1. Robert J. H., Mona C. M. (2002). Report on the use of In-Line Inspection tools for the assessment of pipeline integrity: Report No. DTRS 56-96-C-0002-008. General Physics Corporation. Columbya, Maryland.
2. Rodionov V. V., Grigor'ev M. V. Detection and identification of defects during in-line ultrasonic flaw detection. Proceedings of the All-Russian Scientific and Technical Conference "Student Spring 2014: Engineering Technologies". Moscow: MGTU im. N. E. Baumana. Available at: studves¬na.ru?go=articles&id=994 (Accessed: 23.11.2018). [in Russian language]
3. Reber K., Baller M. (2003). Ultrasonic ILI-tools to inspect older pipelines for crack in girth and long – seam welds. Pigging Products and Services Association. Available at: https://ppsa-online .com/papers / 2003 -2-Reber.pdf (Accessed: 23.11.2018).
4. Beller M., Barbarian A., Strack O. Combine In-Line Inspection of pipelines for metal loss and cracks. ECNDT 2006 Mo.2.5.4. Available at: https://www.ndt.net/article/ ecndt2006/ doc/ Mo.2.5.4.pdf (Accessed: 23.11.2018).
5. Bigus G. A., Daniev YU. F., Bystrova N. A., Galkin D. I. (2015). Fundamentals of diagnostics of technical devices and structures. Moscow: MGTU im. N. E. Baumana. [in Russian language]
6. Shanon & Wilson INC. (2007). Conference Proceedings Report. Maintenance and Intellegent Piping Conferences Anchorage.
7. Kristiansen T.-S., Hans P. B., Willems H., Wiemme G. Combined ultrasonic tethered tool for inspection of weld cracks in offshore pipelines: tool qualification and first results from offshore inspection. PPIM 2015. Houston, Texas. Available at: https://www.easyfairs.com/uploads/tx_ef/PPIM-paper-2015_V4.pdf, 2015. (Accessed: 23.11.18).
8. Vages S. (2018). Inspection of multi – diameter pipelines operating at low pressure, Stefan Vages. Pipeline Technical Journal, (1), pp. 6-17.
9. Classification of defects and methods for repairing defects and defective sections of existing main oil pipelines. Guidance document No. RD 23.040.00-KTN-090–07. Russian Federation. Avaialble at: http://www.tehlit. ru/1lib _ norma _ doc /54/54762/index.htm#i12079 (Accessed: 23.11.18). [in Russian language]
10. Main pipeline transport of oil and oil products. NDT of welded joints. (2014). Guidance document No. RD 25.160.10-KTN-016–15. Russian Federation. Moscow: AK «Transneft'». [in Russian language]
11. Nondestructive testing. Welded joints. Ultrasound methods. (2014). Ru Standard No. GOST R 55724–2013. Russian Federation. Moscow: Standartinform. [in Russian language]
12. Danilov V. N., Ushakov V. M., Mihalev V. V. (2012). To the question of modeling the acoustic path of an inclined transducer with ultrasonic testing of small-thickness welded joints. Defektoskopiya, (10), pp. 28-39. [in Russian language]
13. Ermolov I. N. (1981). Theory and practice of ultrasonic testing. Moscow: Mashinostroenie. [in Russian language]
14. Danilov V. N. (2015). Formulas of the acoustic path of the combined oblique transducer for the far zone. Kontrol'. Diagnostika, (2), pp. 43-50. [in Russian language] DOI: 10.14489/td.2015.02.pp.043-050
15. Danilov V. N. (2015). Formulas of the acoustic path of the far zone of the combined inclined transducer for angular reflectors such as vertical cylindrical holes and drillings. Kontrol'. Diagnostika, (10), pp. 9-16. [in Russian language] DOI: 10.14489/td.2015.010.pp.009-016
16. Danilov V. N. (2015). Formulas of the acoustic tract of ultrasonic testing using the tandem method. Kontrol'. Diagnostika, (3), pp. 44-53. [in Russian language] DOI: 10.14489/td.2015.03.pp.044-053
17. Ermolov I. N., Grebennik V. S., Rayhman A. Z. (1964). Ultrasound reflection from an angular defect. Zavodskaya laboratoriya, 30, pp. 1351-1355. [in Russian language]
18. Perevalov S. P., Rayhman A. Z. (1979). Acoustic path inclined finder for the angular reflector type. I. Defektoskopiya, (11), pp. 5-14. [in Russian language]
19. Perevalov S. P., Rayhman A. Z. (1979). Acoustic path inclined finder for the angular reflector type. II. Defektoskopiya, (12), pp. 28-36. [in Russian language]
20. Kramorov G. A., Evsyukov V. N. (1972). On the ratio of flat-bottomed and angular reflector areas. Defektoskopiya, (4), pp. 137-138. [in Russian language]

 

 

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2019.04.pp.030-035

and fill out the  form  

 

 

 
Search
Баннер
Rambler's Top100 Яндекс цитирования