Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная Current Issue
29 | 03 | 2024
2019, 08 August

DOI: 10.14489/td.2019.08.pp.048-052

 

Vasytenko A. P., Tarakhovskiy A. Yu.
MODELING OF STATIC CHARACTERISTICS OF PNEUMATIC STRAIN GAUGE TRANSDUCER
(pp. 48-52)

Abstract. Measuring instruments that implement the pneumatic principle of measurement, have a number of significant advantages: small dimensions of the measuring equipment, allowing to produce multiparameter control in a limited size of the working area, insensitivity to vibration, simplicity of design and reliability. The disadvantage of pneumatic converters is a discrete output electrical signal, which does not allow the processing of measurement results. In this regard, it seems appropriate to investigate the pneumatic-electric Converter, which includes a jet pneumatic and differential strain gauges, which allows to obtain an analog electrical signal at the output. The article describes the design and principle of operation pneumoenteritis Converter to control the diameter of the part. Pneumotensometric Converter converts the change in the diameter of the part in the movement of the nozzle, which causes a change in the force of the air jet on the beam, its deformation and, accordingly, a change in the resistance of he strain gauge. An expression describing the stoic characteristic of the transducer and allowing to determine the force of the air jet impact on the load cell from the gap between the nozzle and the beam, the air pressure and the nozzle diameter is given. The results of modeling the static characteristics of the Converter at different combinations of design parameters are given, the values of straight sections of characteristics and sensitivity are determined, their comparative evaluation is given.

Keywords: pneumatic converter, tensible, modeling, sensitivity, measuring range, measuring device.

A. P. Vasytenko, A. Yu. Tarakhovskiy (Federal State Autonomous Educational Institution of Higher Education “Sevastopol State University”, Sevastopol, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

 

 

1. Gol'dshteyn A. Е. (2008). Physical bases of measuring transformations: a textbook. Tomsk: Izdatel'stvo TPU. [in Russian language]
2. Shishmarev V. Yu. (2010). The physical basis of obtaining information: a textbook. Moscow: Akademiya. [in Russian language]
3. Latyshenko K. P. (2013). Metrology and measuring equipment based on measuring transducers ARIES: laboratory practical: digital text data. Saratov: Vuzovskoe obrazovanie. [in Russian language]
4. Еlimelekh I. M., Sidorkin Yu. G. (1972). Jet automatics (pneumonia). Leningrad: Lenizdat. [in Russian language]
5. Vasyutenko A. P., Еfremova L. V., Tarahovskiy A. Yu. (2016). Pneumatic throttle converter "nozzle-receiving channel", Vol. 3, pp. 109 – 114. Science in the modern information society X: Proceedings of the Conference.
6. Pashkov Е. V. (Ed.), Osinskiy Yu. A., Chetverkin A. A. (2003). Electropneumatics in industrial processes: a textbook. 2nd ed. Sevastopol': Izdatel'stvo SevNTU. [in Russian language]

 

 

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2019.08.pp.048-052

and fill out the  form  

 

 

 
Search
Баннер
Rambler's Top100 Яндекс цитирования