10.14489/td.2025.03.pp.014-020

2025, 03 March

DOI: 10.14489/td.2025.03.pp.014-020

Danilov V. N., Ushakov V. M.
CALCULATION OF PULSE ECHO SIGNALS WHEN CHANGING THE POSITION OF THE NORMAL PROBE RELATIVE TO THE STRATIFICATION IN THE METAL
(pp. 14-20)

Abstract. A computer simulation of the amplitude change of the pulsed echo signal of a normal probe from a reflector in the form of a strip simulating a stratification in metal, the plane of which is parallel to the control surface, depending on the distance between the axis of the probe and the normal to the surface of the reflector in its center. The calculations used radiated pulses of various durations ‒ long, medium length and short. The expediency of using medium-length pulses has been established. The estimation of the linear conventional length of the stratification model by the method of reducing the amplitude of the echo signal from the largest by 20 dB showed that this size approximately corresponds to the size of the reflector used in calculations for the distance between the plane of the reflector and the control surface approximately equal to the three near fields of the probe.

Keywords: stratification, pulse, echo signal, signal spectrum, normal probe, linear conventional length, acoustic channel.

+ - About the Authors Click to collapse

V. N. Danilov, V. M. Ushakov (JSC “NPO “СNIITMASH”, Moscow, Russia) Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Vorobey A. V. (2022). Features of identifying and assessing the impact of certain defects on the resource of safe operation of production facilities. Collection of abstracts of the X International Scientific and Technical Conference “Reliability and Safety of Main Pipeline Transport”, 47 – 49. Novopolotsk. [in Russian language]
2. Klyuev V. V. (Ed.), Ermolov I. N., Lange Yu. V. (2004). Ultrasonic testing. Non-destructive testing: handbook: in 8 volumes. Vol. 3. 2nd ed. Moscow: Mashinostroenie. [in Russian language]
3. Sheet rental. Ultrasonic testing methods. (1988). Standard No. GOST 22727‒88. Moscow: Goskomstandart. [in Russian language]
4. Ermolov I. N., Vopilkin A. H., Badalyan V. G. (2000). Calculations in ultrasonic flaw detection: handbook. Moscow: NPTs NK «EKHO+». [in Russian language]
5. Danilov V. N. (2010). Towards the calculation of the characteristics of echo signals of transverse and longitudinal waves from reflectors with flat surfaces. Defektoskopiya, (1), 34 ‒ 55. [in Russian language]
6. Danilov V. N. (2009). To the calculation of the acoustic field of an inclined transducer in the far zone. Defektoskopiya, (12), 36 ‒ 51. [in Russian language]
7. Danilov V. N., Voronkova L. V. (2019). Investigation of the effect of attenuation of elastic longitudinal waves in cast iron with flake graphite on the characteristics of signals during ultrasonic testing. Kontrol'. Diagnostika, (6), 18 ‒ 33. [in Russian language]. DOI: 10.14489/td.2019.06.pp.018-033
8. Danilov V. N. (2006). Computer simulation program for the operation of electroacoustic paths of flaw detectors “Impulse +”. Defektoskopiya, (3), 37 ‒ 43. [in Russian language]
9. Danilov V. N., Voronkova L. V. (2020). Investigation of the possibilities of ultrasonic testing of cast iron with lamellar graphite using standard normal probe. Kontrol'. Diagnostika, 23(1), 4 ‒ 18. [in Russian language]. DOI: 10.14489/td.2020.01.pp.004-018

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

The cost of a single article is 700 rubles. (including VAT 20%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please copy the article doi:

10.14489/td.2025.03.pp.014-020

and fill out the form