Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная Current Issue
09 | 11 | 2026
2026, 11 November

DOI: 10.14489/td.2026.11.pp.025-032

Evdokimov А. А., Ogleznev A. A., Sozonov N. S., Fedotov M. Yu.
APPLICATION OF FIBER-OPTIC STRAIN GAUGES FOR NON-DESTRUCTIVE TESTING THE ELASTIC AND STRENGTH PROPERTIES OF POLYMER COMPOSITE MATERIALS
(pp. 25-32)

Abstract. This paper describes the use of various strain gauges to mechanical testing of specimens made of various polymer composite materials. The basic principles and methods for performing strain gauge measurements are described. The results of experimental researches on monitoring the elastic modulus of specimens obtained from medium-modulus carbon fiber with unidirectional and equal-strength reinforcement schemes are presented. These researches were conducted using an extensometer,  an electrical strain gauge, and a fiber-optic strain gauge based on a fiber Bragg grating. It is demonstrated that fiber-optic strain gauges offer a viable alternative to traditional strain gauges. They enable the determination of numerical values of the mechanical properties of polymer composite specimens and, in the future, can be successfully applied as a system for continuous non-destructive optical testing of composite structures, including in challenging operating conditions.

Keywords: strain gauge, polymer composite material, elastic modulus, deformation, fiber optic sensor, fiber Bragg grating.

А. А. Evdokimov (Russian Engineering Academy, Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
A. A. Ogleznev, N. S. Sozonov (LLC “Inversion Sensor”, Perm, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
M. Yu. Fedotov (Russian Engineering Academy, Moscow, Russia, Kazan National Research Technical University named after A. N. Tupolev – KAI, Kazan, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.
D. S. Dorofeev (Kazan National Research Technical University named after A. N. Tupolev – KAI, Kazan, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

 

1. Kablov, E. N. (2015). Innovative developments of FSUE "VIAM" SSC RF on the implementation of "Strategic directions for the development of materials and technologies for their processing for the period up to 2030". Aviatsionnye materialy i tekhnologii, (1), 3–33. [in Russian language]. https://doi.org/10.18577/2071-9140-2015-0-1-3-33
2. Kablov, E. N. (2020). New generation materials and digital technologies for their processing. Vestnik Rossiyskoy akademii nauk, 90(4), 331–334. [in Russian language].
3. Goncharov, V. A., Timoshkov, P. N., & Usacheva, M. N. (2021). Prospects for the production of large-sized aircraft parts from polymer composite materials: a review. Trudy VIAM, (12), 55–62. [in Russian language]. https://doi.org/10.18577/2307-6046-2021-0-12-55-62
4. Seryoznov, A. N., Stepanova, L. N., Kabanov, S. I., Lebedev, E. Yu., et al. (2010). Strain measurement in transport engineering. Nauka. [in Russian language].
5. Stepanova, L. N., Lebedev, E. Yu., Kabanov, S. I., et al. (2013). Investigation of characteristics of wire and semiconductor strain gauges used for measuring impact processes. Datchiki i sistemy, (1), 28–33. [in Russian language].
6. GOST R 56785 2015. (2016). Polymer composites. Test method for tensile testing of flat specimens. Standartinform. [in Russian language].
7. Stepanova, L. N., Kurbatov, A. N., Kabanov, S. I., et al. (2025). Investigation of the possibility of combined application of acoustic emission, strain measurement and acoustoelasticity effect methods for monitoring carbon fiber reinforced plastics under static loading. Kontrol'. Diagnostika, 28(1), 13–25. [in Russian language]. https://doi.org/10.14489/td.2025.01.pp.013-025
8. Fedotov, M. Yu. (2024). Modeling of thermal compensation of optical control data of composite structures by an external fiber-optic temperature sensor. Kontrol'. Diagnostika, 27(1), 4–13. [in Russian language]. https://doi.org/10.14489/td.2024.01.pp.004-013
9. Fedotov, M. Yu., & Vasiliev, S. A. (2023). Methodological aspects of evaluating the sensitivity of fiber Bragg gratings to mechanical and thermal effects for optical monitoring systems of polymer composites. Kontrol'. Diagnostika, 26(12), 13–23. [in Russian language]. https://doi.org/10.14489/td.2023.12.pp.013-023
10. Simonov, V. A., Golikov, E. V., Terentyev, V. S., & Dostovalov, A. V. (2024). FBG in coreless quartz fiber for measuring high temperatures. Prikladnaya fotonika, 11(4), 35–49. [in Russian language]. https://doi.org/10.15593/2411-4375/2024.4.04
11. Wolf, A. A., Dostovalov, A. V., Wabnitz, S., & Babin, S. A. (2018). Femtosecond recording of refractive index structures in multimode and multicore fiber waveguides. Kvantovaya elektronika, 48(12), 1128–1131. [in Russian language].
12. Shuklina, Yu. V., & Koptev, D. S. (2022). Practical results of using various modifications of fiber optic sensors based on Bragg cells. In Elektronnye sredstva i sistemy upravleniya. Materialy dokladov Mezhdunarodnoy nauchno-prakticheskoy konferentsii, (1 1), 113–116. [in Russian language].
13. Vasyutinskaya, S. I., Malkina, V. D., & Kiselev, G. A. (2015). Fiber-optic sensors in aggressive environments: efficiency and environmental friendliness. Ekologicheskiy vestnik Rossii, (9), 35–38. [in Russian language].
14. Buimistryuk, G. (2013). Fiber-optic sensors for extreme conditions. Control engineering, (3), 34–40. [in Russian language].
15. Kachura, S. M., & Postnov, V. I. (2019). Promising fiber-optic sensors and their application: a review. Trudy VIAM, (5), 52–61. [in Russian language]. https://doi.org/10.18577/2307-6046-2019-0-5-52-61
16. Fadeev, K. M., Larionov, D. D., Zhikina, L. A., et al. (2020). Fiber-optic sensor for simultaneous measurement of temperature and pressure using Fabry-Perot interferometer and fiber Bragg grating. Pribory i tekhnika eksperimenta, (4), 115–119. [in Russian language]. https://doi.org/10.31857/S003281622005002X
17. Bulatov, M. I., Trufanov, A. N., Pankova, D. A., et al. (2024). Stress relaxation in silica glass optical fibers at elevated temperatures. Kratkie soobshcheniya po fizike FIAN, 51(1), 38–46. [in Russian language].

This article  is available in electronic format (PDF).

DOI: 10.14489/td.2026.11.pp.025-032

Copy the article DOI and follow the link https://id-spektr.ru/product/pokupka-elektronnoy-stati-iz-zhurnala-kontrol-diagnostika

Please specify the article DOI in the order comments.

 

 

 
Search