10.14489/td.2014.04.pp.040-044

2014, 04 April

DOI: 10.14489/td.2014.04.pp.040-044

Pronin A.I., Mylnikov V.V., Chernyshov E.A., Shetulov D.I.
DEFINITION OF OPTIMUM SPEED OF CUTTING HARD TURNING WITH USE OF SIGNALS ACOUSTICEMISSION
(pp. 40-44)

Abstract. The paper analyses the factors, which influence conditions of hard turning. We have developed the experimental stand to study the relation of acoustic emission informational figure on conditions of hard metal lathe work. We have revealed and experimentally confirmed the diagnostic mark of the hard metal lathe work optimal conditions. We have defined the range of cutting speed, using the signals of acoustic emission, when there created the best conditions for minimum wear intensity of the tool.

Keywords: cutting ceramics, deterioration, hardened steel, optimum speed of cutting, cutting tool, hard turning, signals acoustic emission.

+ - About the Authors Click to collapse

A. I. Pronin
Komsomolsk-on-Amur State Technical University, Komsomolsk-on-Amur, Russia

V. V. Mylnikov, E. A. Chernyshov, D. I. Shetulov
Nizhny Novgorod State Technical University n.a. R. E. Alekseev, Nizhny Novgorod, Russia. E-mail: mrmу Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Kabaldin Iu. G., Mokritskii B. Ia., Pronin A. I. (1991). The durability of the cutting instrument equipped with ceramics and superhard materials. Stanki i instrument, (12), pp. 19-21.
2. Suvorov A. A., Barzov A. A., Goldobin N. D. (1981). Method of selection of the optimal conditions of technological envi-ronment in mechanical processing. Izvestiia vuzov. Mashinostroenie, (16), pp. 133.
3. Poduraev V. N., Barzov A. A., Suvorov A. A. (1980). Op-timization of regimes of mechanical treatment on the basis of the analysis of energy intensity of stress waves. Izvestiia vuzov. Mashinostroenie, (12), pp. 120-124.
4. Poduraev V. N., Barzov A. A., Tutnov I. A. et al. (1980). The role of stress waves in the processes of friction and wear. Trenie i iznos, 1(6), pp. 102-107.
5. Poduraev V. N., Barzov A. A., Gorelov V. A. (1988). Technological diagnostics of cutting by method of acoustic emission. Moscow: Mashinostroenie.
6. Lobanov A. A. (2006). Milling of hardened steel. STIN, (9), pp. 21-23..

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

DOI: 10.14489/td.2014.04.pp.040-044

Copy the article DOI and follow the link https://id-spektr.ru/product/pokupka-elektronnoy-stati-iz-zhurnala-kontrol-diagnostika

Please specify the article DOI in the order comments.