Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная
23 | 10 | 2026
Баннер
2019, 10 October

DOI: 10.14489/td.2019.10.pp.020-025

Dorofeev D. S.
ANALYSIS OF THE RESULTS OF NON-DESTRUCTIVE TESTING OF THE STRESS-STRAIN STATE OF THE GLASS SURFACE IN THE GLUING, USING CURRENT-CONDUCTING COATING
(pp. 20-25)

Abstract. The article discusses the possibility of monitoring with using SCALP type devices (non-destructive method – NDT) the stress-strain state of external glass from the bonding side when in contact with a conductive coating in products of structural optics (IR). Using the example of two medium-sized IR products, measurements of the surface tension of the glass are given when the antiicing system is inoperative and during operation of this system. The results obtained are considered from the point of view of the accumulation of thermal energy in a closed system (glass-film-glass). Additionally, the obtained results on the possibility of determining the composition of the IR to a depth of 20 mm.

Keywords: non-destructive testing method (NDT), Scalp04, triplex, polyurethane film, stress-strain state of glass, transcalency.

D. S. Dorofeev (JSC Institute of Technical Glass (JSC INTG), Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

1. Description of the operating principles of the SCALP-04 device. Available at: https://www.glasstress.com
2. Thermal imager FLIR TI97473. Description and instruction manual. Available at: https://www.flir.eu/products/t620/?model=55903-5223
3. Postnikov V. S. (2013). Optical materials science: lecture course. Perm': Izdatel'stvo Permskogo natsional'nogo issledovatel'skogo politekhnicheskogo universiteta. [in Russian language]
4. Pavlushkin N. M. (1973). Glass: handbook. Moscow: Stroyizdat. [in Russian language]
5. Stepnov N. M. (1972). Statistical processing of mechanical test results. Moscow: Mashinostroenie. [in Russian language]

This article  is available in electronic format (PDF).

DOI: 10.14489/td.2019.10.pp.020-025

Copy the article DOI and follow the link https://id-spektr.ru/product/pokupka-elektronnoy-stati-iz-zhurnala-kontrol-diagnostika

Please specify the article DOI in the order comments.