10.14489/td.2024.01.pp.004-013

2024, 01 January

DOI: 10.14489/td.2024.01.pp.004-013

Fedotov M. Yu.
SIMULATION OF THERMAL COMPENSATION OF OPTICAL TESTING DATA OF COMPOSITE STRUCTURES BY AN EXTERNAL FIBER-OPTIC TEMPERATURE SENSOR
(pp. 4-13)

Abstract. This article describes the theoretical aspects of thermal compensation of data from optical non-destructive testing of deformation of structures made of polymer composite materials using fiber-optic sensors based on fiber Bragg gratings. It is shown that at the stage of bench testing of composite structures, the method of thermal compensation using an external temperature sensor can be successfully applied. Linear and quadratic mathematical models of thermal compensation are analyzed and generalized. It has been established that with the comparative simplicity of the implementation of this method of thermal compensation, the error in determining the deformation is also provided at the level of the error of the interrogator. However, for online testing of composite structures during operation, the use of this method is difficult, due to the fact that the placement of an external temperature sensor is not always possible. The proposed method and the corresponding models can be applied in practice to develop methods for optical testing of samples and structures made of polymer composite materials during bench and other tests, taking into account thermal compensation.

Keywords: polymer composite material, composite structure, optical non-destructive testing, fiber optic sensor, fiber Bragg grating, data temperature compensation, external temperature sensor method, temperature compensation model, optical testing error.

+ - About the Authors Click to collapse

M. Yu. Fedotov (Institute of Automation and Electrometry of the Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.

+ - References Click to collapse

1. Kesarwani S. (2017). Polymer Composites in Aviation Sector. International Journal of Engineering Research & Technology, 6(6), 518 – 525. DOI: 10.17577/IJERTV6IS060291
2. Sivakov D. V., Gulyaev I. N., Sorokin K. V. et al (2011). Features of creating polymer composite materials with an integrated active electromechanical actuator system based on piezoelectrics. Aviatsionnye materialy i tekhnologii, 18(1), 31 – 34. [in Russian language] EDN RNECUX.
3. Goncharov V. A., Fedotov M. Yu., Shienok A. M. et al. (2013). Modeling of infusion technologies for the production of layered polymer composite materials. Vse materialy. Entsiklopedicheskiy spravochnik, (1), 43 – 49. [in Russian language] EDN QABDDV.
4. Orlov F. A. (2019). The use of composite materials in the design of the MS-21 aircraft. Technological innovations and scientific discoveries: a collection of articles based on the materials of the International Scientific and Practical Conference, 43 – 48. Ufa: NITs «Vestnik nauki». [in Russian angauge] EDN RXRBZA.
5. Parveez B., Kittur M. I., Badruddin I. A. et al. (2022). Scientific Advancements in Composite Materials for Aircraft Applications: A Review. Polymers, 14(22). DOI: 10.3390/polym14225007
6. Nayak N. V. (2014). Composite Materials in Aerospace Applications. International Journal of Scientific and Research Publications, 4(9).
7. Mashayekhi F., Bardon J., Berthe V. et al. (2021). Fused Filament Fabrication of Polymers and Continuous Fiber-Reinforced Polymer Composites: Advances in Structure Optimization and Health Monitoring. Polymers, 13(5). DOI: 10.3390/polym13050789
8. Rajan G., Ramakrishnan M., Semenova Yu. et al. (2014). Experimental Study and Analysis of a Polymer Fiber Bragg Grating Embedded in a Composite Material. Journal of Lightwave Technology, 32(9), 1726 – 1733. DOI: 10.1109/JLT.2014.2311441
9. Matveenko V. P. (2021). New opportunities in the design of SPS: probionic structures, smart materials, intelligent monitoring. Fundamental problems of creating a new generation of ATP: a collection of abstracts from the visiting section of the International School-Seminar, 14 – 18. Moscow: Tsentral'niy aerogidrodinamicheskiy institut im. professora N. E. Zhukovskogo. [in Russian language]
10. Matveenko V. P., Kosheleva N. A., Serovaev G. S. (2021). Experimental and theoretical results related to strain measurements with in-material fiber-optic Bragg grating sensors. Izvestiya Rossiyskoy akademii nauk. Mekhanika tverdogo tela, (6), 3 – 15. [in Russian language] DOI: 10.31857/S0572329921060088. EDN BRLEGB
11. Fedorov A. Yu., Kosheleva N. A., Matveenko V. P., Serovaev G. S. (2020). Strain Measurement and Stress Analysis in the Vicinity of a Fiber Bragg Grating Sensor Embedded in a Composite Material. Composite Structures, 239. DOI: 10.1016/j.compstruct.2019.111844. EDN OFCCAW.
12. Dalinkevich A. A., Miheev P. V., Gusev S. A. et al. (2016). Study of longterm water absorption of structural epoxy fiberglass plastics using fiber-optic strain sensors. North of Russia: strategies and development prospects: materials of the II All-Russian Scientific and Practical Conference, 2, 67 – 71. Surgut: Surgutskiy gosudarstvenniy universitet. [in Russian language] EDN ZAJUMN.
13. Dalinkevich A. A., Miheev P. V., Gusev S. A. et al. (2016). Application of fiber-optic strain sensors to study microstructural changes in structural epoxy fiberglass reinforced plastics under the influence of natural aging factors. North of Russia: strategies and development prospects: materials of the II All-Russian Scientific and Practical Conference, 2, 71 – 76. Surgut: Surgutskiy gosudarstvenniy universitet. [in Russian language] EDN ZAJUMX.
14. Larin A. A., Fedotov M. Yu., Buharov S. V. et al. (2017). New applications for fiber optic sensor systems. Prikladnaya fotonika, 4(4), 310 – 323. [in Russian language] EDN YXRLAD.
15. Tanaka N., Okabe Y., Takeda N. (2003). Temperature-Compensated Strain Measurement Using FBG Sensors Embedded in Composite Laminates. Smart Materials and Structures, 12(6), 940 – 946. DOI: 10.1088/0964-1726/12/6/011
16. Liang Z., Liu D., Wang X. et al. (2022). FBG-Based Strain Monitoring and Temperature Compensation for Composite Tank. Aerospace Science and Technology, 127. DOI: 110.1016/j.ast.2022.107724
17. Rocha H., Semprimoschnig C., Nunes J. P. (2021). Small-Diameter Optical Fibre Sensor Embedment for Ambient Temperature Cure Monitoring and Residual Strain Evaluation of CFRP Composite Laminates Produced by Vacuum-Assisted Resin Infusion. CEAS Space Journal, 13, 353 – 367. DOI: 0.1007/s12567-021-00357-5
18. Sivanesan P., Sirkis J. S., Murata Y., Buckley S. G. (2002). Optimal Wavelength Pair Selection and Accuracy Analysis of Dual Fiber Grating Sensors for Simultaneously Measuring Strain and Temperature. Optical Engineering, 41(10), 2456 – 2463. DOI: 10.1117/1.1505638
19. Fedotov M. Yu. (2023). Features of creating a system for simultaneous built-in monitoring of deformation and temperature of composite structures using fiber-optic sensors. Kosmicheskie apparaty i tekhnologii, Vol. 7, 43(1), 24 – 34. [in Russian language] DOI: 10.26732/j.st.2023.1.03. EDN RLKZPE.
20. Aksenova E. N., Gasnikov N. K., Kalashnikov N. P. (2009). Methods for assessing errors in the results of direct and indirect measurements in physics workshop laboratories: educational and methodological manual. Moscow: MIFI. [in Russian language]
21. Fedotov M. Yu. (2023). Theoretical aspects of calibration and error assessment of a fiber-optic system for diagnosing polymer composites. Konstruktsii iz kompozi-tsionnyh materialov, 170(2), 43 – 51. [in Russian language] DOI: 10.52190/2073-2562_2023_2_43
22. Fedotov M. Yu. (2023). Theoretical investigations of temperature compensation of the results of the diagnosis of polymer composites by the method of two optical fiber Defectoscopy, (10), 53 – 65. [in Russian language]. DOI: 10.31857/S0130308223100056.

+ - Purchase digital version of a single article Click to collapse

This article is available in electronic format (PDF).

DOI: 10.14489/td.2024.01.pp.004-013

Copy the article DOI and follow the link https://id-spektr.ru/product/pokupka-elektronnoy-stati-iz-zhurnala-kontrol-diagnostika

Please specify the article DOI in the order comments.