Журнал Российского общества по неразрушающему контролю и технической диагностике
The journal of the Russian society for non-destructive testing and technical diagnostic
 
| Русский Русский | English English |
 
Главная Архив номеров
28 | 03 | 2024
2017, 01 январь (January)

DOI: 10.14489/td.2017.01.pp.044-048

Козочкин М. П., Порватов А. Н.
РАЗРАБОТКА ПЕРЕНОСНОГО И ИНТЕГРИРОВАННОГО ДИАГНОСТИЧЕСКОГО КОМПЛЕКСА ДЛЯ АНАЛИЗА ПРОЦЕССОВ РЕЗАНИЯ МАТЕРИАЛОВ
(с. 44-48)

Аннотация. Описан инновационный диагностический комплекс, позволяющий анализировать состояние технологических систем на стадиях их изготовления и эксплуатации. Приведены сведения о разработке телеметрической связи для передачи измерительной информации от первичных преобразователей. Показан пример анализа технологического процесса.

Ключевые слова:  диагностический комплекс, станок, диагностика процесса резания, информационно-измерительная система, беспроводная связь, система ЧПУ.

Kozochkin M. P., Porvatov A. N.
THE DEVELOPMENT OF PORTABLE AND INTEGRATED DIAGNOSTIC SYSTEM FOR THE ANALYSIS OF PROCESSES OF CUTTING MATERIALS
(pp. 44-48)

Abstract. The article provides the information about the innovative development in the field of creation of diagnostic complexes for the analysis of technological systems, as at the stage of manufacturing and equipment as well as at the stage of operation systems. It also gives the information about the development of telemetry for transmission of measuring data from primary converters. The example of the analysis of the technological process is given. This study demonstrates the systems of real-time structural health monitoring for machine tools based on the various signals (vibration, power, force, etc.) collected through a low-cost microcontroller and module of telemetry for transmission based on data acquisition system. Vibration signal contains the most information because of mechanical disturbances from various sources, such as the engine, sound, noise and others. The examination tests of this developed system have been carried out on a various machine tools. The developed systems results in fast measurement and control without making any additional changes to the structure of the machine. It is expected that the integrated system and telemetry system will allow to solve many problems of monitoring the status of the various technological equipment, machines at the stages of development, commissioning and operation, as well as reduce the total amount of the costs required to service machines.

Keywords: the diagnostic complex, machine, diagnostics of the process of cutting, information-measuring system, wireless communication, the CNC system.

Рус

М. П. Козочкин, А. Н. Порватов (Московский государственный технологический университет «СТАНКИН», Москва, Россия) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

Eng

M. P. Kozochkin, A. N. Porvatov (MSTU «STANKIN», Moscow, Russia) E-mail: Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра. , Данный адрес e-mail защищен от спам-ботов, Вам необходимо включить Javascript для его просмотра.  

Рус

1. Григорьев С. Н., Козочкин М. П., Сабиров Ф. С., Синопальников В. А. Проблемы технической диагностики станочного оборудования на современном этапе развития // Вестник МГТУ «СТАНКИН». 2010. № 4. С. 27 – 36.
2. Козочкин М. П., Сабиров Ф. С. Оперативная диагностика при металлообработке – проблемы и задачи // Вестник МГТУ «СТАНКИН». 2008. № 3. С. 14 – 18.
3. Козочкин М. П., Маслов А. Р., Порватов А. Н. Управление процессом резания посредством интеграции подсистемы диагностирования в систему ЧПУ металлообрабатывающего станка // Вестник МГТУ «СТАНКИН». 2011. № 3. С. 110–111.
4. Исаев А. В., Порватов А. Н., Козочкин М. П. Применение методов диагностики при отладке новых технологических процессов // Станочный парк. 2011. № 10. С. 16 – 19.
5. Козочкин М. П., Сабиров Ф. С., Попиков А. Н. Виброакустическая диагностика при твердом точении // Вестник МГТУ «СТАНКИН». 2009. № 1. С. 23 – 29.

Eng

1. Grigor'ev S. N., Kozochkin M. P., Sabirov F. S., Sinopal'nikov V. A. (2010). The problems of technical diagnostics of machining equipment at the present stage of development. Vestnik MGTU «Stankin», (4), pp. 27-36. [in Russian language]
2. Kozochkin M. P., Sabirov F. S. (2008). Operational diagnostics in the metal processing – problems and challenges. Vestnik MGTU «Stankin», (3), pp. 14-18. [in Russian language]
3. Kozochkin M. P., Maslov A. R., Porvatov A. N. (2011). Control of the cutting process by integrating diagnostics subsystem in CNC machine tool system. Vestnik MGTU «Stankin», (3), pp. 110-111. [in Russian language]
4. Isaev A. V., Porvatov A. N., Kozochkin M. P. (2011). Application of diagnostic methods for stabilization of new technological processes. Stanochnyi park, (10), pp. 16-19. [in Russian language]
5. Kozochkin M. P., Sabirov F. S., Popikov A. N. (2009). Vibro acoustic diagnostics in solid turning. Vestnik MGTU «Stankin», (1), pp. 23-29. [in Russian language]

Рус

Статью можно приобрести в электронном виде (PDF формат).

Стоимость статьи 350 руб. (в том числе НДС 18%). После оформления заказа, в течение нескольких дней, на указанный вами e-mail придут счет и квитанция для оплаты в банке.

После поступления денег на счет издательства, вам будет выслан электронный вариант статьи.

Для заказа статьи заполните форму:

Форма заказа статьи



Дополнительно для юридических лиц:


Type the characters you see in the picture below



.

Eng

This article  is available in electronic format (PDF).

The cost of a single article is 350 rubles. (including VAT 18%). After you place an order within a few days, you will receive following documents to your specified e-mail: account on payment and receipt to pay in the bank.

After depositing your payment on our bank account we send you file of the article by e-mail.

To order articles please fill out the form below:

Purchase digital version of a single article


Type the characters you see in the picture below



 

 

 

 

 

.

.

 

 
Поиск
На сайте?
Сейчас на сайте находятся:
 17 гостей на сайте
Опросы
Понравился Вам сайт журнала?
 
Баннер
Rambler's Top100 Яндекс цитирования